For detailed information, other images and documents, please select individual articles from the following table.
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Enables pre-drilling for the Tipmatic-XP Plus stop
Use with the jig
The jig is made up of:
- 2 x pins for pre-drilling Euro screws
- 2 x pins for pre-drilling chipboard screws Ø 3.5 mm
- 1 x hexagon key
- 2 x grub screws to secure the pins inserted in the jig
- 1 x Tipmatic-XP Plus jig
1) Perforate the side of the cabinet using the template for Dynamic guide rails, for Euro screws (Ø 5 mm) or chipboard screws Ø 3.5 mm (centre drill)
2) The position of the Tipmatic-XP Plus jig is dependent on the length of the guide rail, choose the position by inserting pins in the drilled holes (Euro or chipboard screws) made previously (see figures A + B)
3) After positioning the Tipmatic-XP Plus jig, you can pre-drill the Tipmatic-XP stop (see figure C)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!