For detailed information, other images and documents, please select individual articles from the following table.
Direct to rust enamel smooth effect
Protects the surface from rusting by providing a smooth, shiny finish. Two effects in one: Protection and beauty.
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Features:
- Effective even on rusty metal surfaces. No need to remove rust; simply sand and remove poorly adhered particles.
- No need for primers or corrosion protection. Saves time and money, as a prior treatment does not need to be applied (see general recommendations). Indicated for outdoor and indoor use.
- Good coverage.
- Shiny rust-resistant enamel.
- High adhesion.
- An airtight seal is obtained to prevent the passage of moisture.
- Can be applied to iron, steel, galvanised surfaces, wood, new work, restorations or maintenance, enamel paints.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
Instructions for use
Shake before use until perfectly mixed. Apply to clean, dry surfaces.
Prepare the surface (see general recommendations). For proper protection, we recommend applying 120 dry microns of enamel. (2-3 coats).
Handle in ventilated areas.
Cleaning and thinning with solvent for direct to rust enamel art. no. 0828900600, according to the attached table.
General recommendations
Iron and steel
No need to remove rust; simply sand and remove poorly adhered particles and loose rust.
Apply 2-3 coats for proper protection.
Galvanised surfaces
Use primer beforehand for galvanised surfaces.
New wood.
Use wood sealant beforehand.
Gypsum, cement and derivatives
Remove saltpetre, moisture or any foreign products beforehand.
Paint
If the paint is in poor condition, remove it mechanically or chemically.
If the paintwork is in good condition, simply clean and degrease. If the finish is glossy or shiny, sand the surface to improve adhesion.
Do not apply on surfaces that are wet, heated or very hot.
Do not apply when the relative humidity is greater than 80 %.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!