For detailed information, other images and documents, please select individual articles from the following table.
Contact adhesives DC-25
Cartridge contact adhesive, solvent-based, high viscosity and high initial adhesion power
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Adhesive especially suitable for withstanding initial stresses, characteristic of the fixings of skirting boards and bases in wooden decking.
Features
- Single-component adhesive based on synthetic rubbers.
- It does not thread.
- Greater working comfort as the possibility of becoming stained with the threads disappears. Clean product cut.
- Great adhesion power.
- High tensile strength.
Frost-sensitive product. Do not apply below 5°C.
Do not use in expanded polystyrenes, polypropylene, polyethylenes or Teflon.
Product for indoor use.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
The surfaces to be joined must be clean, dry and free of grease, oil or dust.
Cut the nozzle of the cartridge, screw in the cannula and cut it in an oblique direction at the height corresponding to the thickness of the bead to be applied.
Apply the adhesive to one side in the form of beads or dots 10-15 cm apart. Join the surfaces to be joined together, separate and repeat this process several times to accelerate solvent evaporation. End by pressing on the surfaces to be joined.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!