For detailed information, other images and documents, please select individual articles from the following table.
Double-sided adhesive tape 3 mm
Double-sided adhesive tape, 3 mm thick
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Features
- Standard double-sided tape.
- Ideal for securing panels while the adhesive dries.
- For glass, wood, metal and plastic.
- Use for panelling.
Advantages
- Ensures the minimum adhesive thickness is 3 mm.
- Thanks to its high adhesion, panels do not move from their required place while the polyurethane dries.
Benefits
- Very high adhesion on most substrates.
- Adheres to rough substrates.
Not recommended for application on PVC.
For panelling, the surface to be bonded must be clean, dry and free from grease and dust.
For non-porous materials, metals, plastics, ceramics, glass and painted surfaces,
clean the surface with paper moistened with adhesion cleaner/activator art. no.089010060.
Allow to dry for at least 10 min.
Remove dust from any wooden surfaces.
In both cases, select the appropriate K+D primer depending on the surface (see below).
Shake the primer vigorously (you can hear the steel ball moving around inside the can).
Apply a thin layer evenly with a brush or sponge.
Leave to dry for at least 30 min. (max. 8 hours).
Place the tape along the strip, without removing the protective paper.
Apply K+D adhesive art. no. 0890 100 … or Bond + Seal Power art. no. 0893 235… for heavy exterior panels.
Apply with triangular nozzle art. no. 0891651 about 5 mm away from the tape.
Remove the protective paper from the tape and press the panel firmly to make contact with the tape. Do this before the adhesive forms a skin (about 10 min.).
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!