For detailed information, other images and documents, please select individual articles from the following table.
Sealproof accelerant EVO
Additive for Sealproof EVO that accelerates its curing time
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Accelerates the cure time of the Sealproof EVO.
Drying time approximately 15°C for 4-6 hours.
Eliminates air formation inside the membrane.
Eliminates curing bubbles and other defects in the Sealproof EVO membrane.
Increased product thixotropy.
Allows Sealproof EVO to be applied in thick layers
The entire product must be mixed with Sealproof EVO 25 kg to achieve the desired effects.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
The product is formulated to act in combination with 25 kg of Sealproof EVO, without affecting the properties of the resulting membrane. Add accelerant to the liquid membrane and mix gently with an electric mixer until completely homogenised. Leave to stand for a few minutes before applying. Once an accelerant has been added to the Sealproof EVO, it is recommended that no other diluent be added
Consumption:
The ratio between the Sealproof EVO accelerant and Sealproof EVO 25 kg is 1 litre/25 kg.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!