ASSY® 3.0, blue galvanised Particle board screw
For detailed information, other images and documents, please select individual articles from the following table.
ASSY® 3.0, blue galvanised Particle board screw
Universal use in furniture construction, carpentry, shopfitting and interior fittings.
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
Galvanised steel, blue coated, full thread, countersunk head, AW drive
Joins wood instead of splitting it
AW drive for more power
- Optimal force transmission
- Excellent fit
- Rapid finding
- Screw settles securely
- Virtually no unscrewing of bit
- No wobbling
- No damage to surface coating of screw
- Only 5 bit sizes for diameters 3.0 to 12.0 mm
Shank milling cutter – the "auxiliary motor" for low force
- Reduction of the screw-in and head countersinking torque, especially with long screws
- Gentle on your tools
- From Ø = 5 mm, L = 70 mm
Asymmetric thread — faster speed
- Low screw-in torque
- High over-turning force
- Faster screwing than conventional particle board screws
Ring/mating thread — less tendency of the wood to split, very few blow-outs
- Low splitting forces, in particular when screwing close to edges
- Reduction of screw-in torque
- Punch effect of ring thread largely prevents blow-outs
- Ring thread: 3.0–4.5 mm
- Mating thread: 5.0–12.0 mm
NoticeThe screws are not suitable for outdoor use and for rooms subject to short-term or continuous high moisture levels! Please use ASSY® 3.0 A2 stainless steel screws in these cases. Use Würth timber construction software to measure the ASSY screws with a diameter of more than 5mm. To attach metals to wood, bradawl a precise cutout in the metal tab. ASSY 3.0 particle board screws are optimised for use in wooden materials. When used in plastic anchors, a reduction of the load-bearing capacity is possible. Therefore, we recommend only using screws without optimised thread tips (drilling tip, mating thread, ring thread, serrated edge, self-clearing groove, etc.) in plastic dowels, e.g. Würth ASSY D, prefix 0151 (countersunk head) and prefix 0153 (pan head).
ETA-11/0190
When using these screws, please follow ETA-11/0190 specifications.
Application areaUniversal use in furniture construction and carpentry to screw two components made from wood or metal into wood.
InstructionsScrew-in angle 0° to 90°. For coniferous wood or wood-based materials made from softwood, make the fitting without a bradawl. To reduce the edge distances make a predrilled hole according to the core diameter. When screwing into hardwood, drill according to ETA-11/0190.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!