Powerful unblocker
Drain pipe cleaner strong
DRNPIPCLNR-STRONG-UNBLOKER-1LTR
Register now and access more than 125,000 products
High concentration of sulphuric acid
Effectively breaks down residue blocking pipes.
Good density
Facilitates the product passing through the pipes.
Safety cap
Prevents product spills or handling by third parties.
Reacts aggressively in contact with water. Wear acid-resistant gloves, goggles specially designed to protect against liquid splashes and a mask with an active carbon filter. May tarnish stainless steel or damage delicate enamels and paints. Do not use in lead pipes.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
Datasheets(X)
For removing blockages in toilet drains, urinals,
sinks, baths etc., produced by organic and inorganic matter such as cellulose, cardboard, cotton, rags, food scraps, fats, hair, slaughterhouse waste etc.
Remove any water in the clogged receptacle (sink, toilet etc.). Then pour the product down the drain
slowly until the pipe is completely filled from the blockage to the end. Leave to work for 20-30 minutes. The operation can be repeated 24 hours after the first application. Do not mix with bleach, caustic soda or other products. Never pour water onto the unblocker as this will increase the temperature and may cause a very sudden and dangerous spontaneous exothermic reaction.
Chemical basis | Sulphuric acid |
Contents | 1 l |
Density | 1.85 g/cm³ |
Shelf life from production | 24 Month |