Powder plaster SUPER PLASTER INTEX
Adhesive filler SUPER PLASTER INTEX
ADHFILR-(SUPER PLASTER INTEX)-15KG
Register now and access more than 125,000 products
A multitude of applications
- For use on indoor and outdoor surfaces such as plaster, glass, cement, plastic paints, rigid plastics etc.
- Rebuilds and repairs decorative elements and volumes, sculptures, cornices, angles without formwork, flashings etc.
- Can also bond materials of different types and/or degrees of absorption.
Excellent properties
- Highly adherent plaster for all types of indoor and outdoor surfaces.
- Water- and moisture-resistant, and can be applied in humid environments.
- Perfect adhesion on slightly porous surfaces.
- Applicable in any thickness with a single coat.
- Easy to mould and trim while fresh.
Highly fungicidal
Prevents fungi from appearing and growing.
Very flexible and does not shrink
Can be applied on substrates that may move slightly. Does not shrink or crack.
Renovation properties
- Can renovate walls without removing the ceramic coating (tiles).
- Can rebuild and repair construction and decorative elements such as cornices, corners, flashings, sculptures etc.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
Datasheets(X)
Apply on clean, healthy, dry, dust-free surfaces. Surfaces must be consistent and clean from old peeling paint.
Add 1 kg of powder per 0.4 L of water and mix to a smooth, consistent paste for immediate use. Do not stir once the product has begun to set. Apply with a smooth trowel or stainless steel spatula. Clean tools immediately after use.
Shelf life from production | 60 Month |
| Technical data | |
| Composition | Mineral fillers, hydraulic binders and synthetic resins |
| Thinner | Water |
| Appearance | Powder |
| Colour | White |
| Can be coloured | Supports universal dyes max. 3 % |
| Odour | Lavender perfume |
| Apparent density of powder | 0.95 0.05 g/cm3. |
| Apparent density of paste | 1.4 0.05 g/cm3. |
| Granulometry | <500 μ |
| pH | Of the paste: 11 ± 0.5 after 24 hrs. 9 0.5 |
| Adhesion | On concrete: > 20 kg/cm2 On tiles:> 18 kg/cm2 |
| Compressive strength (28 days) | 200 ± 20 kg/cm2 |
| Flexural strength (28 days) | 80 ± 10 kg/cm2 |
| Resistant to freeze-thaw cycles | 25 cycles: -15°C/20°C without changes |
| Classification | AFNOR NT F 36-003 Family IV, Class 4b. For repairing products per NFT P-18840, it is classified as Class 1 |
| Certifications | BUREAU VERITAS, CEBTP, GIKESA |
| Application | |
| Application temperature | Between 5°C and 30°C |
| Mix | 0.4 L of water per 1 kg of powder |
| Tool | Smooth trowel or spatula |
| Tool cleaning | With water, immediately after use |
| Maximum thickness per layer | Any thickness |
| Working time | 30 minutes at 20°C |
| Theoretical consumption | 1 kg per m2 and mm of thickness |
| Drying time at 20°C and 65 % RH | From 2 to 4 hours, depending on thickness and weather conditions |
| Painting | 24 hours, 3 hours if the product has been applied in a very thin coat |
Last viewed
Blade for cable tie gun
Rope, mast anchorage Basic
Single rosette
ATO resettable fuse For continuous operation (permanent installation) and fault finding (diagnostics)
Cover cap for number plate screw Article prefix number 0210
Centre drill bit For hammer core drill bit
Hexagon socket set screw with truncated cone ISO 4026 A4 stainless steel 21H, plain
W-VD-A anchor rod A4 stainless steel
1/2 inch impact socket wrench insert hexagon, metric, short
Lock plate with tabs