Plastic multi-purpose ZEBRA Shark<SUP>®</SUP> anchor with collar - DWL-PLA-COLLAR-6X37

Plastic multi-purpose ZEBRA Shark^® anchor with collar

Name: Plastic multi-purpose ZEBRA Shark ® anchor with collar
Brand: Würth
SKU: 090600637

Plastic multi-purpose anchor, Shark, with collar
DWL-PLA-COLLAR-6X37
ZEBRA-SHARK

Art.-no. 090600637

EAN 4024835774833

All versions

Similar products

Prices for customers after login

Plastic multi-purpose ZEBRA Shark^® anchor with collar

Art.-no. 090600637

Prices for customers after login

Quantity

x 200 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

Universal anchor for fixtures in almost all building materials (low load range)

Fully resistant to rotting, weathering and ageing

Thermally stable from -40°C to +100°C

Colour: Mother-of-pearl white

Pre-formed thread means low insertion torque for WÜPOFAST screw

Longitudinal locking edges prevent rotation

A single screw diameter can be used, regardless of the application

Expanding segments knot together or fold out for positive locking in perforated brick/cavity walls

Pre-formed thread in head

Three-way division for anchorage via positive locking or friction locking

Wings act as anti-rotation device in solid or hollow block brick

For mounting, we recommend the ASSY-D plug screw

Drill the hole

Clean the drill hole

Install anchor

Screw in screw until flush

Drill the hole

Install anchor

Screw in screw until flush

Drill the hole

Install anchor

Screw in screw until flush

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Can be used with the maximum screw diameter in solid and hollow block brick to ensure good holding power

In gypsum plasterboard panels, pressboard, wood panels etc.

For use with stud screws, hooks, ring bolts, WÜPOFAST screws, ECOFAST screws, wood screws (e.g. ASSY-D)

Anchor diameter	6 mm
Material	PE - Polyethylene
Colour	Oyster white
Required screw diameter	4.5 mm
Anchor length (l)	37 mm
Nominal drill-bit diameter (d 0)	6 mm
Drill hole depth (t)	45 mm
Embedding depth (h s)	36 mm
Required screw length (l s)	Thickness of the add-on part (+ plaster/insulation thickness) + anchor length + screw diameter
Type description	Zebra Shark anchor 6, with collar

Performance data
Anchor diameter [mm]			5	6	7¹⁾	7¹⁾	8	10	12	14
Recommended loads²⁾	Concrete ≥ B25; C20/25	F_rec. [kN]	0,2	0,3	0,3	0,3	0,4	1,0	1,1	1,3
	Solid bricks ≥ Mz12; KS12		0,2	0,3	0,3	0,3	0,35	0,4	0,45	0,45
	Vertically perforated brick ≥ Hlz12³⁾		0,1	0,15	0,15	0,15	0,2	0,25	0,25	0,3
	Hollow sand-lime bricks ≥ KSL12³⁾		0,2	0,2	0,2	0,2	0,4	0,4	0,5	0,6
	Aerated concrete PB2; PP2³⁾		0,04	0,1	0,12	0,12	0,15	0,2	0,2	0,3
	Gypsum plasterboard d = 12.5 mm		0,1	0,1	0,1	0,1	0,1	0,1	0,1	0,1
	Gypsum plasterboard d = 25 mm		0,15	0,15	0,15	0,15	0,15	0,15	0,15	0,15
	Pumice		0,11	0,13	0,15	0,15	0,18	0,23	0,25	0,28
¹⁾ Diameter of 7 mm still without preformed thread. ²⁾ These values apply when using wood screws with the largest screw diameter. ³⁾ The drill hole is to be made with a rotary drill (without impacting or hammering).

Characteristic values
Screw diameter	d_scr [mm]	3,5	4,5	5	5	6	7	8-10	10-12
Screw diameter for board-type building materials	d_{scr 2} [mm]	3	4	4,5	4,5	5,5	7	8	10
Screw length		= anchor length + material thickness to be fastened + screw diameter + any plaster/insulation thickness
Nom. drill dia.	d_drl. [mm]	5,0	6	7	7	8	10	12	14
Drill hole depth	t ≥ [mm]	40	45	45	60	60	70	80	85
Embedment depth	h_S ≥ [mm]	30	35	35	50	50	60	70	75
Hole diameter in component	d_constr ≥ [mm]	5,5	6,5	7,5	7,5	7	10,5	12,5	14,5

Required accessory:

Product

Description

Quantity

Price
/PU

ASSY<SUP>®</SUP> D<br/>plug screw Countersunk head

ASSY® D plug screw Countersunk head

SCR-CS-WO-AW20-(A2K)-4X35/29,5

Art.-no. 0151020402

Without drill tip, for use with plastic anchors

x 500 pcs

ASSY® D plug screw Countersunk head

SCR-CS-WO-AW20-(A2K)-4X40/34,5

Art.-no. 0151020403

Without drill tip, for use with plastic anchors

x 500 pcs

ASSY® D plug screw Countersunk head

SCR-CS-WO-AW20-(A2K)-4,5X40/34

Art.-no. 0151024503

Without drill tip, for use with plastic anchors

x 500 pcs

ASSY® D plug screw Countersunk head

SCR-CS-WO-AW20-(A2K)-4,5X50/44

Art.-no. 0151024505

Without drill tip, for use with plastic anchors

x 250 pcs

ASSY<SUP>®</SUP> D<br/>plug screw Pan head, without drill tip

ASSY® D plug screw Pan head, without drill tip

SCR-PANHD-WO-AW20-(A2K)-4X35/29,5

Art.-no. 0153020402

For use with plastic anchors

x 500 pcs

ASSY® D plug screw Pan head, without drill tip

SCR-PANHD-WO-AW20-(A2K)-4X40/34,5

Art.-no. 0153020403

For use with plastic anchors

x 500 pcs

ASSY® D plug screw Pan head, without drill tip

SCR-PANHD-WO-AW20-(A2K)-4,5X40/34

Art.-no. 0153024503

For use with plastic anchors

x 500 pcs

ASSY® D plug screw Pan head, without drill tip

SCR-PANHD-WO-AW20-(A2K)-4,5X45/39

Art.-no. 0153024504

For use with plastic anchors

x 500 pcs

Impact tool assortment

IMPTL-AERATED-CONCRETE

Art.-no. 0906100001

For making drill holes in aerated concrete

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).