Plastic frame anchor W-UR 14

Name: Plastic frame anchor W-UR 14
Brand: Würth
SKU: 0912814002

Plastic frame anchor, W-UR 14
ANC-(W-UR14)-PLA-10-14X110
ZEBRA

Art.-no. 0912814002

EAN 4052712295195

All versions

Similar products

Prices for customers after login

Plastic frame anchor W-UR 14

Art.-no. 0912814002

Prices for customers after login

Quantity

x 25 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

Universal frame anchor for concrete and masonry, suitable for scaffolding eyelet screw W-GS SymCon

Anchor sleeve made of high-quality polyamide

Notice

Useful information:

The user must conduct test loading at each place of use, in accordance with German safety regulation BGI/GUV-I 663, item 4.6.3

For anchoring in solid brick and solid sand-lime brick, we recommend that you perform pull-out tests due to the differences in brick manufacturing

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

The anchor may be used for one-off temporary anchoring of façade scaffolding with a service life of < 2 years

W-UR, W-UR F can be anchored in the following anchoring bases: Standard concrete, masonry walls (solid brick, solid sand-lime brick, vertically perforated brick, perforated sand-lime brick, hollow lightweight concrete blocks, solid bricks and blocks made of lightweight concrete, concrete bricks)

Suitable for attaching façade scaffolding, staging, scaffolding systems etc.

Anchor diameter	14 mm
Anchor length (l)	110 mm
Max. attachment height (t fix)	10 mm
Nominal drill-bit diameter (d 0)	14 mm
Type description	W-UR 14

Performance data: Concrete, Anchors in a redundant non-structural system
Anchor diameter		[mm]	W-UR 14 SymCon
Embedment depth of the anchor sleeve		h_nom [mm]	100
Centric tension load¹⁾ for individual anchors or an anchor group	N_adm = C12/15 [kN]	30°C²⁾/50°C³⁾	2.4 (2.1)⁴⁾
		50°C²⁾/80°C³⁾	2.4 (2.1)⁴⁾
	N_adm ≥ C16/20 [kN]	30°C²⁾/50°C³⁾	3.2 (2.1)⁴⁾
		50°C²⁾/80°C³⁾	3.2 (2.1)⁴⁾
Minimum member thickness	h_min	[mm]	140
¹⁾ The partial safety factors of the resistances regulated in the approval and a partial safety factor of the actions of γF = 1.4 have been taken into account. For information on combining tensile and shear loads, please refer to ETAG 020 Annex C ²⁾ Maximum long-term temperature ³⁾ Maximum short-term temperature ⁴⁾ Number of attachment points = 3 and at least 1 anchor per attachment point results in a load per attachment point of N_adm ≤ 2.1 kN or number of attachment points ≥ 4 and at least 1 anchor per attachment point results in a load per attachment point of N_adm ≤ 2.4 kN or 3.2 kN (depending on concrete strength and temperature range).

Performance data: Masonry⁴⁾, anchors in a redundant non-structural system (temperature range 50°C²⁾/80°C³⁾) For other brick types, raw densities, minimum compressive strengths, edge and axis distances or temperature ranges, please refer to the approval ETA-11/0309
Brick type	Brick format [mm]	Raw density class [kg/dm³]	Minimum compressive strength [N/mm²]	N_adm [kN] ^{1) 5)} (centric tension load for individual anchors)
Effective anchorage depth	h_nom [mm]			100
Masonry brick Mz, EN 771-1, DIN 105	≥ 3DF (≥ 240 x 115 x 113)	≥ 1.8	10	1,0
			20	1,57
Solid sand-lime brick Silka XL Basic, Silka XL Plus, EN 771-2, DIN 106, Z-17.1-997	≥ NF (≥ 248 x 175 x 498)	≥ 2.0	10	0,86
			20	1,29
			28	1,86
Normal weight concrete solid brick Vbn, EN 771-3, DIN 18153	≥ NF (≥ 240 x 115 x 71)	≥ 2.0	10	0,57
			20	0,86
			28	1,14
Normal weight concrete solid brick V, EN 771-3, DIN 18152-100 e.g. BisoBims Classic, Bisotherm	≥ 3DF (≥ 240 x 175 x 113)	≥ 2.0	10	1,14
			20	1,57
Lightweight concrete solid brick V, EN 771-3, DIN 18152-100 e.g. BisoBims	≥ NF (≥ 240 x 115 x 71)	≥ 1.0	2	0,34
			4	0,57
Vertically perforated brick HLz⁶⁾, EN 771-1, DIN 105 e.g. Wienerberger, Schlagmann	≥ 12DF (≥ 373 x 240 x 238)	≥ 1.2	6	0,43
			8	0,57
			10	0,71
Vertically perforated brick HLz T14-24.0⁶⁾, EN 771-1, Z-17.1-651 e.g. Wienerberger	≥ 10DF (≥ 308 x 240 x 249)	≥ 0.7	6	0,17
Vertically perforated brick POROTON T8-30⁶⁾, POROTON T9-30⁶⁾, EN 771-1, T8: Z-17.1-982, T9: Z-17.1-674 Wienerberger, Schlagmann	≥ 248 x 300 x 249	≥ 0.6	6	0,43
			8	0,57
Hollow sand-lime brick KSL⁶⁾, EN 771-2, DIN 106-1 e.g. Xella	≥ 8DF (≥ 249 x 240 x 238)	≥ 1.4	6	0,34
			8	0,43
			10	0,57
			12	0,71
Hollow concrete block of lightweight concrete 3K Hbl, EN 771-3, DIN 18151⁶⁾ e.g. Liapor	≥ 16DF (≥ 498 x 240 x 238)	≥ 0.7	2	0,14
			4	0,26
			6	0,43
¹⁾ The partial safety factors of the resistances regulated in the approval and a partial safety factor of the actions of γF = 1.4 have been taken into account. For information on combining tensile and shear loads, please refer to ETAG 020 Annex C ²⁾ Maximum long-term temperature ³⁾ Maximum short-term temperature ⁴⁾ For other brick types, raw densities, minimum compressive strengths or temperature ranges, please refer to the approval ETA-11/0309. ⁵⁾ The brick geometry should be compared with the approval ETA-08/0190. ⁶⁾ If the drill hole is created through impact or hammer action, the admissible load must be determined by tests on the structure.

Additional accessory:

Product

Description

Quantity

Price
/PU

Scaffolding eyelet screw W-GS SymCon®

BLT-EYE-FRAME-(A0K)-6.8-10X330

Art.-no. 0160810006

For plastic frame anchor W-UR 14. Galvanised steel, strength class 6.8.

x 25 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).