Plaster DILAFIB
Filler DILAFIB fibreglass-reinforced, ready-to-use
PORFILR-DILAFIB-FBRGLSREINFD-4KG
Register now and access more than 125,000 products
For indoor and outdoor use
- Reinforced with fibreglass.
- Ideal for covering cracks and fissures both inside and outside.
- Substitute for elastic bands or bandages.
- Excellent adhesion to all types of surfaces: concrete, mortars, cement, gypsum, plaster, wood and all kinds of painted surfaces.
Permanent elasticity
- Capable of absorbing stresses created by movement.
- Highly resistant to ageing.
Can be painted
Can be painted with all types of coatings, except epoxy solvent-based polyurethanes. Leaves no limescale.
Can be coloured
Can be coloured with universal dyes (4 % max.).
Do not apply to surfaces subject to permanent moisture.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
Datasheets(X)
Surfaces must be well-prepared, dry and free from grease, powders and waxes.
Vee out the crack and remove any loose mortar or damaged paint.
If the cracks are very wide, pre-fill with Super Plaster Intex outdoors.
On very absorbent surfaces, apply a coat of primer to ensure better bonding of the filler.
Apply with a stainless steel trowel or spatula, leaving a strip of filler of at least 5 cm on both sides of the crack.
Smooth out any lumps with the spatula when the product starts surface drying.
On firm surfaces and small cracks, the crack does not need to be pre-filled with other products. Simply apply the Plaster Dilafib directly.
Exempt from safety labelling.
Shelf life from production | 60 Month |
| Technical data | |
| Composition | Acrylic copolymers |
| Thinner | Water |
| Density | 1.2 +/- 0.05 g/cm3 |
| Consistency | Fibrous paste |
| Can be coloured | Greyish. Supports universal or water-based colourants, max. 4 % |
| Application temperature | Between 5°C and 30°C |
| Application tool | Smooth trowel or stainless steel spatula |
| Maximum thickness per layer | 3 mm |
| Working time | No limit |
| Theoretical consumption | 1 L x m2 and mm thickness |
| Drying time | 2-24 hours, depending on thickness and environmental conditions |
| Sanding/painting | After dry |
Last viewed
Panel bracket set F8 Nova Pro Scala
Precision twist wood drill bit assortment HSCo, 10 pieces
Pistol grip ratchet magazine screwdriver without bits
Medium-strength screw retainer
Flat paintbrush For solvent-based lacquer and paint systems
Aluminium clamping rods With quick-adjustment feature
Easy Puller dent removal tool
Cable gland, polyamide PG
Rolling tool case
Jump starter, 12/24 V