PinPuller® power pulling electrodes
PinPuller Power pulling electrodes single-row
PULLELTRD-PINPULLER-POWER-10FOLD
PIN PULLER
Register now and access more than 125,000 products
Broad range of applications:
- Heavy slide hammer
- Pulling attachment for straightening jig
- Pulling bar
The grid grooves allow secure attachment of the pulling cross piece at any desired position
Individual electrodes are quick to weld on and easy to remove by twisting
Saves working time
Multiple electrodes at intervals of only 9 mm ensure optimum force distribution
In contrast to wiggle wire, pin electrodes can be welded on more than 500 times
Each electrode has an insulated bearing and so only requires minimal welding power, reducing the heat transferred to the sheet metal
Prior to initial use, the brass coating must be removed from the tips of the electrodes.
Datasheets(X)
Length | 92 mm |
Product weight (per item) | 117.000 g |
Last viewed
Fork extractor for Siemens injectors With M18 connecting thread
Glazing packer
Sling Fall Arrester Type 2
Starter cable 25 mm²
Furniture glider base module For screwing onto wooden furniture
Spyhole, type B With crystalline lens and 200° viewing angle
Small bucket scoop With wooden grip, zinc-plated
Maintenance sticker For the engine compartment
Continuously adjustable one-ear clamp
Potential equalization rail For indoor use