Particle board screw Wüpofast ® 2.0
WÜPOFAST 2.0 steel zinc plated FT counters. head Z
SCR-CS-WO-RT-Z2-(A3K)-4,5X25/19
Register now and access more than 125,000 products
The screw that bites
Flat countersunk head
- Suitable for wood and fittings
- Screws into fittings without damaging the coating
End mill (size 5 x 70 mm)
- 40 % reduction in friction when screwing in
- Reduced use of power tools (longer service life)
Normal thread/coarse thread
- Normal thread pitch on small screws, for improved sealing in chipboard
- Coarse thread for quick screwing
End mill incorporated in the reamer
- Less effort required when screwing in due to reduced friction
- Reduced development of cracks
Needle tip
- Provides optimal hold without slipping
- Continious thread
- Does not damage the surface
PZD drive
- The most popular drive on the market
- Easy insertion/centring
- Excellent adhesion
- Improved drive precision
Datasheets(X)
 | |
Nominal diameter (d) | 4.5 mm |
Length (l) | 25 mm |
Head type | Countersunk head |
Head diameter (dh) | 8.8 mm |
Head height (k) | 2.7 mm |
Internal drive | Z2 |
Thread type | Wood screw thread |
Thread design | Full thread |
Thread form | Single start thread |
Thread length (lg) | 19 mm |
Core diameter | 2.7 mm |
Shape of tip | Pinpoint |
Angle of the tip | 23 Degree |
Material | Hardened steel |
Surface | Zinc plated |
Product weight (per item) | 1.490 g |
Area of application | Fitting |
RoHS-compliant | Yes |
Last viewed
Metric double box-end wrench with POWERDRIV®
Twisted rod For rivet nut setting pliers HES 510
Water pump pliers DIN ISO 8976
Cordless impact wrench ASS 18 1/2 inch COMPACT M-CUBE
Flat washer with chamfer DIN EN ISO 7090, steel, hot-dip galvanised (hdg), hardness class 200 HV
Wedge lock washer Nord-Lock, narrow shape (NL)
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
Bi-puller For wiggle wire
Timing tool set suitable for VW 1.4 - 1.6 16V, diesel
3/4-inch impact socket wrench insert hexagon, metric, short