Particle board screw Wüpofast ® 2.0
WÜPOFAST 2.0 steel zinc plated yellow FT cs head Z
SCR-CS-WO-RT-Z2-(A2L)-3,5X50/46
WUEPOFAST
Register now and access more than 125,000 products
The screw that bites
Flat countersunk head
- Suitable for use on wood and hardware
- Screws into hardware without damaging the coating
Reamer (measurements 5 x 70 mm)
- Reduces friction during screw-in by 40%
- Less stress on electrical tools (longer service life)
Fine pitch/coarse pitch thread
- Fine pitch thread on small screws for better grip on particle board
- Coarse pitch thread for faster screw-in
Reamer incorporated in the thread
- Less effort required during screw-in thanks to the reduction in friction
- Reduces cracking
Needle tip
- Allows optimal contact without slipping
- The thread reaches right to the end of the tip
- Does not damage the surface
PZD drive
- The most popular drive on the market
- Good insertion/centring
- Good adhesion
- Improved drive precision
Datasheets(X)
 | |
Nominal diameter (d) | 3.5 mm |
Length (l) | 50 mm |
Head type | Countersunk head |
Head diameter (dh) | 6.9 mm |
Internal drive | Z2 |
Material | Steel |
Surface | Zinc plated yellow |
Product weight (per item) | 1.980 g |
RoHS-compliant | Yes |
Last viewed
Hole puncher assortment 12 pieces with manual hydraulic punch
Standard cable tie with plastic latch
Fixanchor internal thread W-FAZ-IG/A4 - push-through installation
Pull handle ST/A100
1/4 inch cardan joint
Fabric sanding belt Synthetic corundum for electric grinding file
Coverall Pro 4/5/6 disposable protective suit
1/2" socket wrench insert Triple square, long
Head protection fleece cap
Hexagon nut, low profile with fine thread DIN 439, steel, zinc-plated blue passivated (A2K)