Chipboard screw Wüpofast ® 2.0
WÜPOFAST 2.0 steel zinc-plated FT counters. head Z
SCR-CS-WO-RT-Z1-(A2K)-3X20/16
Register now and access more than 125,000 products
The screw that bites
Flat countersunk head
- Suitable for wood and fittings
- Screws into fittings without damaging the coating
End mill (size 5 x 70 mm)
- 40 % reduction in friction when screwing in
- Reduced use of power tools (longer service life)
Normal thread/coarse thread
- Normal thread pitch on small screws, for improved sealing in chipboard
- Coarse thread for quick screwing
End mill incorporated in the reamer
- Less effort required when screwing in due to reduced friction
- Reduced development of cracks
Needle tip
- Provides optimal hold without slipping
- Continious thread
- Does not damage the surface
PZD drive
- The most popular drive on the market
- Easy insertion/centring
- Excellent adhesion
- Improved drive precision
Datasheets(X)
 | |
Nominal diameter (d) | 3 mm |
Length (l) | 20 mm |
Head type | Countersunk head |
Head diameter (dh) | 5.9 mm |
Head height (k) | 1.8 mm |
Internal drive | Z1 |
Thread type | Wood screw thread |
Thread design | Full thread |
Thread form | Single start thread |
Thread length (lg) | 16 mm |
Core diameter | 1.95 mm |
Shape of tip | Pinpoint |
Angle of the tip | 23 Degree |
Material | Hardened steel |
Surface | Zinc plated |
Product weight (per item) | 0.670 g |
Area of application | Fitting |
RoHS-compliant | Yes |
Last viewed
Contact spray Oxidation solvent
High Power battery
Special die holder
Lashing strap with clamping lock and fitting
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
1/4 inch socket wrench insert, metric short
Combination wrench set, extra long 12 pieces
Angle grinder protective panel on both sides WSH 230
Collated nails and gas cartridge NG CS-2/3 HFB
Water pump pliers DIN ISO 8976