Pan head tapping screw, shape F with recessed head Z DIN 7981, steel, zinc-plated, blue passivated (A2K), PZ drive, round head, shape F
DIN 7981 steel ZN plat. pan head tap. scr. Z shape F
SCR-PANHD-DIN7981-F-Z2-(A2K)-4,2X6,5
Art.-no. 0115304265
EAN 4038898543718
Register now and access more than 125,000 products
Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
Shape C = thread with tip
Shape F = thread without tip
Shape R = thread with rounded tip
Datasheets(X)
CAD data (available after login)
 | |
Material | Steel |
Surface | Zinc plated |
Form | F |
Nominal diameter (d1) | 4.2 mm |
Length (l1) | 6.5 mm |
Head diameter (dk) | 8.2 mm |
Head height (k1) | 3.05 mm |
Internal drive | Z2 |
DIN | 7981 |
Head type | Pan head |
Declaration of performance (EU-CPR) | No |
Standards | DIN 7981 |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Shape of tip | F |
Last viewed
Hexagon nut DIN 934, brass, nickel-plated (E2J)
Hand tap set HSS, DIN 352 3 pieces
Wheel brush Stainless steel, crimped, with shank
Jigsaw blade, wood, three stars multiblade
Wire end ferrule with plastic sleeve
1" slider with pin detent
Steel nail with deep countersunk head and discontinuous longitudinal corrugation
Cetus shorts
Twist drill bit HSCO DIN 338 type RN
Clog EVA