Pan head tapping screw, shape F with recessed head DIN 7981, A2 stainless steel, plain, round head, PH drive, shape F
DIN 7981 A2 stainless steel, H pan head, shape F
SCR-PANHD-DIN7981-F-H2-A2-4,2X13
Register now and access more than 125,000 products
Datasheets(X)
CAD data (available after login)
 | |
Matière | Stainless steel A2 |
Finition | Plain |
Form | F |
Diamètre nominal (d1) | 4.2 mm |
Longueur (l1) | 13 mm |
Head diameter (dk) | 8.2 mm |
Hauteur de tête (k1) | 3.05 mm |
Empreinte intérieure | H2 |
DIN | 7981 |
Forme de tête | Pan head |
Declaration of performance (EU-CPR) | No |
Normes | DIN 7981 |
Type de filetage | Self-tapping screw thread |
Thread design | Full thread |
Forme de pointe | F |
| Thread size | St 2.2 | St 2.9 | St 3.5 | St 3.9 | St 4.2 | St 4.8 | St 5.5 | St 6.3 | St 8 | St 9.5 |
| Min. sheet thickness (mm) | 0,8 | 1,1 | 1,3 | 1,3 | 1,4 | 1,6 | 1,8 | 1,8 | 2,1 | 2,1 |
| Max. sheet thickness (mm) | 1,8 | 2,2 | 2,8 | 3 | 3,5 | 4 | 4,5 | 5 | 6,5 | 7,5 |
| Pre-drilling diameter (mm) | 1,2 | 2,1 | 2,6 | 2,8 | 3,0 | 3,5 | 4,1 | 4,7 | 6,1 | 7,7 |
Last viewed
Lenght stop
Thread cutting tool set HSS M3-M12 44 pcs in system case 8.4.1
Hexagonal bolt with threading up to the head DIN 933, steel 10.9, plain
Countersunk screw with hexalobular head ISO 14581, A2-070 stainless steel, plain
Stone drill bit DZ 1
Elmo® AP damp-room venetian blind switch With reverse lock
Rubber hose line H07RN-F
Suction hose, clip-on For ISS and TSS series
Pipe separating chisel For pneumatic chipping hammers
VDE heavy-duty side cutters DIN ISO 5749, IEC 60900