Pan head tapping screw, shape C with AW drive
WN 111 stainless steel A2 pan head AW
SCR-PANHD-WN111-C-AW20-A2-3,9X19
Register now and access more than 125,000 products
AW drive system
- Optimal torque transmission
- Longer service life
- Optimum centring
- Better mounting output thanks to fatigue-free screwing in; the required contact pressure for transmission of the torques is considerably lower
- Largest possible contact surface of bit in screw drive
- Even force distribution prevents damage to the surface-protection coating and therefore ensures better resistance to corrosion
Datasheets(X)
CAD data (available after login)
 | |
Matière | Stainless steel A2 |
Finition | Plain |
Form | C |
Diamètre nominal (d1) | 3.9 mm |
Longueur (l1) | 19 mm |
Head diameter (dk) | 7.55 mm |
Hauteur de tête (k1) | 3.05 mm |
Empreinte intérieure | AW20 |
Forme de tête | Flat head |
Declaration of performance (EU-CPR) | No |
Normes | WN 111 |
Type de filetage | Self-tapping screw thread |
Thread design | Full thread |
Forme de pointe | C |
| Thread size | St 2.2 | St 2.9 | St 3.5 | St 3.9 | St 4.2 | St 4.8 | St 5.5 | St 6.3 | St 8 | St 9.5 |
| Min. sheet thickness (mm) | 0,8 | 1,1 | 1,3 | 1,3 | 1,4 | 1,6 | 1,8 | 1,8 | 2,1 | 2,1 |
| Max. sheet thickness (mm) | 1,8 | 2,2 | 2,8 | 3 | 3,5 | 4 | 4,5 | 5 | 6,5 | 7,5 |
| Pre-drilling diameter (mm) | 1,2 | 2,1 | 2,6 | 2,8 | 3,0 | 3,5 | 4,1 | 4,7 | 6,1 | 7,7 |
Last viewed
Plastic carry bag For CLL 18, CLLG 18 and PLL 18
Blade receptacle Uninsulated
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
1/2 inch socket wrench insert metric, hexagon, short
Dispenser system
Drive screw For Fixograss 9000 drilling jig, SBL-3 and VBL-2
Angle grinder EWS 7-115 BASIC
U-clip with internal hook
Trousers THERMIC CLASSIC REFLEX
VDE screwdriver set 14 pieces