Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated yellow (A2C), round head H, shape C
DIN 7981 steel zinc-ptd. yellow rnd head H shape C
SCR-PANHD-DIN7981-C-H2-(A3C)-4,2X13
Register now and access more than 125,000 products
Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
Shape C = thread with tip
Shape F = thread without tip
Shape R = thread with rounded tip
Datasheets(X)
CAD data (available after login)
 | |
Material | Steel |
Surface | Zinc plated yellow |
Form | C |
Nominal diameter (d1) | 4.2 mm |
Length (l1) | 13 mm |
Head diameter (dk) | 8.2 mm |
Head height (k1) | 3.05 mm |
Internal drive | H2 |
DIN | 7981 |
Head type | Pan head |
Head details | 0 - not applicable |
Declaration of performance (EU-CPR) | No |
Standards | DIN 7981 |
Thread type | Self-tapping screw thread |
Thread design | 0 - not applicable |
Shape of tip | C |
Last viewed
Dry vacuum cleaner TSS 7-L BASIC
Small mist lubricator For pneumatic tools
Plus Quadro-L Vario hammer drill bit
Hand tap, second tap HSS DIN 352
Connector DIN 7427 1/4 inch
Wing-tip drilling screw, countersunk
Comfort breathing mask - folded 3M Aura 9300+
Oval rosette Aluminium, inner PZ
System case 8.4.2
Flat head drilling screws with recessed head and self-tapping screw thread