Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
DIN 7981 steel zinc plated pan head H shape C
SCR-PANHD-DIN7981-C-H2-(A2K)-4,8X80
Register now and access more than 125,000 products
- Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
- Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
- Shape C = thread with tip
- Shape F = Thread without tip
- Shape R = Thread with rounded tip
Datasheets(X)
CAD data (available after login)
 | |
Material | Steel |
Surface | Zinc plated |
Form | C |
Nominal diameter (d1) | 4.8 mm |
Length (l1) | 80 mm |
Head diameter (dk) | 9.5 mm |
Head height (k1) | 3.55 mm |
Internal drive | H2 |
DIN | 7981 |
Head type | Pan head |
Declaration of performance (EU-CPR) | No |
Standards | DIN 7981 |
Thread type | Self-tapping screw thread |
Shape of tip | C |
Last viewed
Double-sided transfer tape
Blind rivet, flat head
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated
Integra H53 single-walled frame
Drift punch According to DIN 6458
Metric ratchet combination wrench Flexible ratchet head with POWERDRIV®
Screw with flattened half round head and hexagon socket ISO 7380-1 A2-070 stainless steel, plain
Alkaline manganese button cell 1.5 V
Stainless steel rosette shields
Mars shirt