Paint with anti-mould preservative
Anti-mould paint
PNT-INTERIOR/OUTSIDE-ANTIMOULD-WHTE-24KG
Register now and access more than 125,000 products
Features
- Excellent whiteness and optimum coverage.
- Breathable to water vapour.
- Good coverage.
Advantages
- Does not yellow.
- Odourless once dry.
- Easy to apply.
Benefits
Prevents the proliferation of fungi, bacteria and microorganisms in high-risk areas such as kitchen walls and ceilings, bathrooms, basements, stairs etc.
When applying on new surfaces:
Wait 30 days until the mortar is set. Clean any efflorescence with abrasive blasting. Neutralise alkaline surfaces.
When applying to plaster:
Wait until it is dry (max. 20 % moisture) to clean the substrate of foreign products. Clean any efflorescence with abrasive blasting. Fill any defects in the substrate.
When applying on painted surfaces:
Completely remove old paint that is in poor condition or poorly adhered. Glossy surfaces must be matted to ensure good adhesion. Fill any defects in the substrate with putty.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
Datasheets(X)
Interiors and exteriors not directly exposed to the weather.
Shake the product until it is perfectly mixed. Dilute the product according to the porosity and condition of the substrate on the first coat. Finish with one or more slightly diluted coats until the substrate is completely covered. Do not apply the product at temperatures below 5°C or on surfaces exposed to strong sunlight.
Solvent for dilution and cleaning: water.
Brush or roller application: dilute 10-20 %.
Application with airless gun: dilute 5-30 %.
Colour | White |
Contents | 15.5 l |
Weight of content | 24 kg |
Chemical basis | Water |
Drying time | 4 h |
Max. processing temperature | 30 °C |
Min. processing temperature | 5 °C |
Conditions to maintain shelf life from production | at 5°C to 30°C |
Conditions for drying time | at 20°C and 55% relative humidity |
Shelf life from production | 24 Month |
| Technical data | |
| Finish | Matte |
| Specific weight | 1.55 +/- 0.05 kg/L |
| Viscosity | 115 +/- 15 poise |
| Solids by volume | 44 +/-1 |
| Solids by weight | 66 +/-1 |
| VOC | Cat A/BA 75/30 (2007/2010):0.65 g/L |
| Output | 10-12 m²/L |
| Dry to the touch | 1 hr. at 20°C |
| Washing | 25-30 days |
| Repainting | 3-4 hours |
| Classification | AFNOR: NFT. 36005 Family I Class 7b2 |
Last viewed
Assembly set For cable boxes
EPDM sealing ring
Leak stop spray
VDE junction box WMini
Screw with flattened half round head and hexagon socket ISO 7380-1 steel 010.9, zinc-plated blue passivated (A2K)
Würth MODYF high-visibility work fleece
System connector SV 20 E
Daily Race S1P low-cut safety shoes
PVC packing tape
Pin contact 1.0 Uninsulated