PVC pneumatic hose
PVC pneumatic hose
PNHOSE-KIT-SR-ID9,5MM-L10M-S2000-3PCS
Register now and access more than 125,000 products
High operating comfort and a wide range of application possibilities
Low weight
Reduced risk of injury
Kits are pressed with sleeves. As a result, there are no protruding parts as with conventional hose clamps.
Ideal for use both indoors and outdoors
Highly resistant to UV rays, oil and petrol
Long life span
The surface is resistant to shocks and being stepped on
Datasheets(X)
Compressed air supply for tools, pneumatic machine control, ideal for use in the workshop and on the construction site
Inner hose diameter | 9.5 mm |
Outer diameter of hose (A) | 14.5 mm |
Length (L) | 10 m |
Design | With fittings Series 2000 |
Bending radius | 40 mm |
Min./max. temperature conditions | -15 to 65 °C |
Burst pressure | 64 bar |
Max. operating pressure | 16 bar |
Colour | Blue |
Material | PVC - Polyvinyl chloride |
Last viewed
Dispenser system
Cylinder tapping screw, shape C with slot DIN 7971, steel, zinc-plated, blue passivated (A2K), shape C
HSS annular cutter
Damper For number plate holders
360° Pump spray bottle
PVC Insulation Tape
Safety glasses UB ONE
Halogen-free threaded connector LH IP67
Zinc adhesive weight For cars
Ratchet for 10 mm bits