Welcome to Würth Canarias For trade customers only
PU 40 + building adhesive and sealant - STRUCADH-(PU40 PLUS)-GREY-POUCH-600ML

PU 40 + building adhesive and sealant

Stick and seal filler PU 40 plus
STRUCADH-(PU40 PLUS)-GREY-POUCH-600ML

Art.-no. 0892212600
EAN 4058794723670
All versions

Prices for customers after login
PU 40 + building adhesive and sealant

Art.-no. 0892212600

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Versatile polyurethane filler
  • One-component polyurethane-based elastomeric filler

  • Easy to extrude and smooth over

  • Does not run

  • Quickly hardens upon contact with moisture in the air

  • Quick-drying

  • Sets fast for quick adherence of parts

  • Excellent adhesiveness on most traditional materials in buildings and industry

  • Highly elastic once dry

  • Can be painted or sanded with a suitable abrasive

  • Good compatibility with water-based paints. Test before using with solvent-based paints

  • Resistant to tearing and bad weather

  • Highly resistant to ageing, water and salt spray

  • Non-corrosive

  • Resistant to UV

  • * Comes with a nozzle for special pouch gun

SNJF F 25E label


Façade no. 4305

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

PU filler recommended for bonding various building materials and for seals. Can be used without primer on most common materials such as wood, aluminium, lacquered metal, polyester, glass, PVC, concrete, terracotta, stone, porcelain stoneware and earthenware. Also suitable for laying tiles, draught-proofing walls, filling cracks, sealing woodwork, sealing and waterproofing ventilation ducts and fitting skirting boards

Instructions

Parts to be assembled should be flat, dry and free from dust, grease and other pollutants which may prevent adhesion. Clean surfaces before use with a suitable degreasing agent or acetone


Apply with a manual, pneumatic or electric gun


The cartridge or pouch must be used within 24 hours of opening


Do not apply in temperatures below +5°C


If using in cold weather, store the cartridges above +20°C before use


Do not apply in direct sunlight

Contents

600 ml

Container

Bag

Chemical basis

Single component polyurethane

Colour

Grey

Min./max. skin-formation time

45-55 min

Density/conditions

1.18 g/ml / at 20°C

Full curing speed/conditions

3 mm/d / 23°C and 50% relative humidity

Min./max. processing temperature

5 to 35 °C

Min./max. temperature resistance

-40 to 90 °C

Min. longitudinal resistance to tearing

40 N/m

Short-term resistance against

Petrol

Shelf life from production/conditions

12 Month / at 5°C to 25°C

Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Manual gun for cartridges and bags
Manual gun for cartridges and bags

MANCLKGGUN-SAUS/CART-ALU-600ML

Universal manual gun for use with cartridges and bag.
Caulking gun up to 300 ml 14:1
Caulking gun up to 300 ml 14:1

MANCLKGGUN-SAUS-14:1-(UPTO-600ML)

Robust sausage pack applicator gun can be converted for cartridges of different sizes and thicknesses
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Standard application nozzle For bags
Standard application nozzle For bags

APPLNOZ-STANDARD-F.SAUSPCK-L13CM

x 20 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details