PAVILACK
2C PU floor paint PAVILACK
PURLAC-PAVILACK-(COMP-A/B)-RED-5KG
Register now and access more than 125,000 products
Excellent resistance
Resists the effects of sun exposure and wear from heavy traffic.
Excellent applicability
Good performance, even when exposed to adverse weather conditions.
Great ability to adhere to substrates.
Permanent elasticity
Pavilack forms a coat of paint that has good elasticity for resistance to traffic abrasion, long exposure to adverse weather conditions, temperature and sun exposure.
Application in highly humid conditions may produce differences in the final tint of the product. Pavilack should be applied in a relative humidity of less than 95% and greater than 45%. Store in a dry place, protected from frost or direct sunlight, in its packaging.
This information is a recommendation only, based on our experience. You must test the product first.
We guarantee consistent quality of our products and we reserve the right to make technical alterations.
Datasheets(X)
Floor paint for use in car parks, industrial buildings, cellars, workshops, offices and laboratories. High-strength paint for floors subject to heavy traffic. Colourful decorative finish for concrete or screed floors. Ideal for indoor and outdoor applications on floors subject to high demand, such as traffic, shock, sun exposure to UV rays and high humidity.
Make sure that the surface on which Pavilack is to be applied is clear of any dirt such as oils, loose mortar residue or any other material that may hinder a completely smooth finish. This cleaning should be done without water. Mix component B into component A using a slow mechanical stir (max. 40 rpm). The mixture is ready to use once a uniform paint has been obtained in the chosen colour. Apply at least 2 criss-cross coats and allow to dry for 10-12 hours between coats. The drying time between coats may be affected by the relative humidity of the air and by the ambient temperature. Do not apply the finish coat when humidity exceeds 95 % and temperatures exceed +40ºC. Avoid air currents as this may cause problems with colour variation. Extend and apply with a short-pile roller.
Flash-off time conditions | at 20°C and 50% relative humidity |
Min. flash-off time | 4 h |
Density | 0 g/cm³ |
Density conditions | at 20°C |
Hardener content | 56 % |
Contents | 5 l |
Weight of content | 5 kg |
Shelf life from production | 12 Month |
Conditions to maintain shelf life from production | at 10°C to 25°C |
VOC concentration (CH) | 25 % |
Last viewed
Heat shrink hose, medium-walled
Cross assembly jig
Reducing sleeve 10/8
Rivet nut with flat head and knurled shank
360° Pump spray bottle
System insert 8.4.1, screwdriver
Pneumatic impact screwdriver DSS 1/2 inch Premium Power
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Aluminium standing ladder with platform ALUFINE XT3
VDE screwdriver, AW For working on live parts up to 1,000 V (AC) and up to 1,500 V (DC)