Oil binder Basic - OILABSORBGRA-BAG-50LTR

Oil binder Basic

Name: Oil binder Basic
Brand: Würth
SKU: 08906

Oil absorbent granules Basic
OILABSORBGRA-BAG-50LTR

Art.-no. 08906

EAN 4045727156933

All versions

Similar products

Prices for customers after login

Oil binder Basic

Art.-no. 08906

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

Water-repellent material for wiping up oily substances easily.

Extremely high degree of absorbency

1 litre of oil absorbent granules easily absorbs 0.6 litres of oil

All substances containing oil are absorbed

Absorbed substances remain 100% bound and are not released again

Does not absorb water and is therefore also suitable for use in water

Flash point: 300°C

Can be stored for an unlimited time

Notice

After use, the oil binder is toxic waste and must be properly disposed of at a facility intended for this purpose. Not suitable for hydrofluoric acid.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Oil binding agent in granular form for removing oil stains and other chemicals from workshop floors, workbenches etc.

Contents	50 l
Oil absorber type	Oil absorber type III
Straßen-Rutsch-Test (German road slip test)	8 %
Loose weight	250 g/l
pH value	6.6
Colour	Amber

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 5

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.