Offset steel door split spindle 10 mm with M12 threaded roller
Change pin with threaded roller
CHPIN-F.DRFRN-THR12-ST-(ZN)-10/8X85MM
Register now and access more than 125,000 products
- These steel door spindles can be used to install a door handle with an 8 mm square on a house door
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer steel door spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
For house doors.
Screwing in the grub screw expands the spindle in the handle.
 | |
Suitable for min./max. door thickness | 55-60 mm |
Material | Steel |
Surface | Zinc plated |
DIN direction | DIN R/L |
Square size | 10 mm/8 mm |
Length (L) | 85 mm |
Last viewed
Jet pipe HDR 160 C/185 PP For high-pressure cleaner HDR 160 Compact and HDR 185 Power Plus
Application gun HandyMax
Wire end ferrule with plastic sleeve
Tool bag, open, with plastic base
WÜPOFAST® A2 chipboard screw A2 stainless steel, full thread, pan head, PZ
Premium hollow gouging chisel with SDS-plus drive arbour
System insert 8.4.1, screwdriver
Wheel hub grinder type B
Allen key set, hexagon socket 9 pieces
Double-end box wrench, deep depressed centre 8 pieces