OBX 20-9397/160 hinge plate
Hinge plate, OBX 20-9397/160
HNGEPLT-(OBX-20-9397-160-CN)-A2-MATT
Register now and access more than 125,000 products
- High degree of precision and stability
- Innovative, ball-bearing technology with very good running properties
- Wear and maintenance-free
- The hinges are ready-mounted with a fixable bearing and are supplied adjusted with no play
- No pin locking required, as the axle is pressed in firmly and cannot be removed
- Important EN 1935 test criteria for class 14.
- Continuous testing, 200,000 cycles, on a 160 kg door.
- Overload testing with additional load of 320 kg (total of 480 kg).
- The hinges are pulled apart with 1.5 t and still need to work properly.
- The hinges can be used in DIN R and DIN L doors without alteration.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
Suitable for use on grooved and fire-retardant wooden doors, which are mounted on wood, steel and aluminium frames in conjunction with a three-dimensionally adjustable mounting element.
 | |
Roll diameter | 20 mm |
Roll height | 160 mm |
Material | Stainless steel A2, 1.4301 |
Gloss level | Matt |
DIN direction | DIN R/L |
Load capacity with 2 hinges | 160 kg |
Fire resistance rating | T30 |
Standards | EN 1935 |
Hinge class | 14 |
EC declaration of conformity (CE) | Yes |
Construction product | Yes |
Environmental Product Declaration | Yes |
| Classification key according to DIN EN 1935: 2002 | |||||||
| 4 | 7 | 7 | 1** | 1 | 4 | 1 | 14 |
| ** See expert opinion No.210003750-01 of MPA NRW for proven fire properties | |||||||
Last viewed
ZD 7 handle hole
VDE screwdriver, flat slotted
Furniture glider insert, stop glider
Klebfix superglue
Single wire seal (SEAL) For uninsulated cable connector
Small surface painter’s roller DW For dispersions and wall paints
Twist drill bit HSS DIN 338 type RN 130°
Screwdriver for hexagon drive with flexible shaft
Quick-release clamp
Plug valve for trap 2 pcs, chrome-plated