Nylon anchor

Name: Nylon anchor
Brand: Würth
SKU: 09035 25

DWL-PLA-5X25

Art.-no. 09035 25

EAN 4045989772575

All versions

Similar products

Individual price display after login

Nylon anchor

Art.-no. 09035 25

Individual price display after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

For light loads (secondary attachments)

High-quality polyamide (nylon).

Halogen- and silicone-free.

Temperature-resistant from -40 °C to +80 °C.

Hammer-in stop prevents premature expansion of the fixing during installation.

The anti-rotation lock prevents rotation in the drill hole.

Fixing shaft without expansion zone prevents damage to plaster and tiles.

Suitable for push-through and pre-positioned installation.

We recommend the ASSY-D screw for installation.

Notice

Drill perforated blocks with a rotary drill (without impact mechanism).

Drill cuttings must be removed from the drill hole.

Screw length = fixture thickness (+ plaster/insulation thickness) + fixing length + screw diameter.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Plastic anchor for light loads (secondary attachments)

Can be used in concrete, solid brick, solid sand-lime brick, hard natural stone

Suitable for securing curtain rails, wall shelves, light wall cupboards, picture frames, cable ducts, cable clamps, electrical switches, towel rails, signs, motion detectors, hanging baskets etc.

For attaching components in conjunction with a wood or chipboard screw (without drill tip, counter thread, ring thread) (e.g. ASSY-D)

Can be used outdoors or in wet rooms in conjunction with a stainless steel screw

Anchor diameter	5 mm
Anchor length (l)	25 mm
Embedding depth (h nom)	25 mm
Nominal drill-bit diameter (d 0)	5 mm
Required wood screw diameter (d scr.wood)	2.5 - 4 mm
Required particle-board screw diameter (d scr.particle)	4.5 mm
Embedding depth (h s)	25 mm
Centre-to-centre distance (a)	50 mm
Edge clearance (a r)	25 mm
Drill hole depth (t)	35 mm
Max. attachment height (d a) - condition	Dependent on screw length
Required screw length (l s)	Thickness of the add-on part (+ plaster/insulation thickness) + anchor length + screw diameter

Additional accessory:

Product

Description

Quantity

Price
/PU

Impact tool assortment

IMPTL-AERATED-CONCRETE

Art.-no. 0906100001

For making drill holes in aerated concrete

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).