Non-woven sanding belt For RED PERFECT® 3D electric band file
Fleece sand. belt for RED PERFECT 3D grinding file
SNDBL-FLC-COARSE-16X520MM
Art.-no.
0585702010
EAN 4065746435222
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
For matting, burnishing and finishing (final grinding) as well as for levelling of stainless steel handrails with strict requirements for decorative surfaces.
- Perfect final sanding (finish sanding) suitable for high surface requirements with significantly lower roughness depth, without producing a high-gloss finish.
- Very long service life and even distribution of the abrasive grain guarantee a consistent sanding finish on the workpiece
- Reinforced nylon sanding fleece with three-dimensional non-woven structure
- The flexible and elastic structure of the fleece ensures optimal adaptation to the workpiece. No change to the geometry of the workpiece.
- Significant reduction in reworking
Notice
- At high rotation speeds, a coarse grain acts like a finer grain and at low rotation speeds, a fine grain acts like a coarser grain.
- Use tools with a low contact pressure; high contact pressure leads to premature wear.
- With insufficient chip removal, do not increase the contact pressure, but instead use a coarser grain.
- Enhanced process reliability Whether you are working with an electric sanding file, tube belt sander, stationary contact grinding machine or angle grinder, a consistent surface quality is guaranteed.
Application area
- For finishing, matting, burnishing and cross-fading with very low roughness depth
- Removing discolouration, paint layers, surface rust, repairing surfaces with minor damage and fine matting
- Materials to be processed: Steel, stainless steel, aluminium, brass and copper
Width x length | 16 mm x 520 mm |
Design | Coarse |
Colour | Brown |
Grid size | 100 |
Product information
Datasheets(X)
Last viewed
NP profile short cylinder In 6-pin system
WÜPOFAST® zinc-plated blue chipboard screw
Union nut
Allen key
Raised countersunk head screw with H recessed head DIN 966, A2 stainless steel, plain
Metric combination wrench With POWERDRIV®, 11 pieces
Metric combination wrench with POWERDRIV®
Winter sleeves START UP
Bermuda shorts SMART
1/2 inch socket wrench insert, metric
