Non-slip paint spray
Non-slip paint spray
PNTSPR-NONSLP-TRANSPARENT-500ML
Register now and access more than 125,000 products
Characteristics
- Very fast-drying, non-slip paint with excellent elasticity.
- Good resistance to wear.
- Easy to apply and repaint.
- Ideal for indoor and outdoor use.
Advantages
- Aerosol format, no additional accessories required.
- Excellent bonding on almost any type of surface.
- Stable to UV rays with good durability and colour stability.
Benefits
- Liquid product that adapts to any surface shape.
- Easy to use and ideal for obtaining non-slip surfaces in a short space of time.
Do not apply to connected electrical equipment or in direct contact with chlorinated water. Use in well-ventilated areas. Contact the technical department for applications that are in contact with shower, pool edges and other similar situations, as continuous exposure of the product to water may change its properties.
This information is intended to provide the best practice advice possible, based on our knowledge and experience. We cannot assume any liability for individual applications due to the variety of applications and storage and application conditions that are beyond our control. This also applies when using the free technical and sales customer support we provide. We always recommend that you test the product first. We guarantee the consistent quality of our products. We reserve the right to make technical alterations and improvements. See the product data sheet for more information.
Datasheets(X)
For any metal, wood or cement surfaces that require a non-slip finish. Suitable for floors, stairs and in traffic areas in general. Indoor and outdoor use.
Shake the can thoroughly before use. Remove corrosion with a wire brush. Apply to clean, dry surfaces in thin layers for best results. Invert the can to clean the valve after use.
Colour | Transparent |
Contents | 500 ml |
Chemical basis | Acrylic resin |
Min. flash-off time | 10 min |
Drying time | 2 h |
Coating thickness | 15 µm |
Max. temperature resistance | 50 °C |
Yield (area) | 2.5 m² |
Shelf life from production/conditions | 24 Month / at 10°C to 30°C |
Last viewed
Linch pin
ORSY® 10 dispenser system For heat shrink hoses
Strainer dispenser box
Leak detection technology Nitrogen pressure reducer
Selective cleaner for construction
Fir tree clip
EDG 2 electronic spyhole
Moisture-protective mat for sink floor units
Sabre saw blade, stainless steel, three stars For stainless steel sheets and piping
C 6.3 TX bit (1/4 inch)