Non-slip additive
Non-slip additive PAVILACK
NONSLPADD-MICROSPHERE-PAVILACK-150G
Register now and access more than 125,000 products
Resistant for indoor and outdoor use.
Uniform non-slip effect and easy to clean.
Suitable for mixing with clear or pigmented 1- or 2-component water- or solvent-based paints.
The result of this mixture gives the paint applied non-slip properties.
Non-flammable and no chemical reactions.
Ideal for use with paints such as Pavilack, Pavimark etc.
Datasheets(X)
For swimming pools, changing rooms, sports spaces, car parks, storage, industrial buildings, warehouses, petrol stations, road areas etc. Both indoors and outdoors to give a non-slip effect by mixing with paint. Do not use on ramps or inclines greater than 2 %.
Apply to the last coat, incorporating into the paint by stirring manually or mechanically at low speed. The additive does not affect the colour or transparency of the finish.
A mixture dose of 3 % of the total paint is recommended depending on the desired non-slip effect. For example in 5 kg of paint the dose is 150 g (a full bottle of non-slip additive).
Storage
Maximum recommended storage time: 24 months in its original container, well sealed and sheltered from the elements (under cover at temperatures between 5°C and 40°C).
Last viewed
Bike chain spray
Adjusting ring DIN 705, shape A and DIN 553 set screw, zinc-plated steel, blue passivated
Cupboard rail support, round
Pipe separating chisel For pneumatic chipping hammers
Mechanical setting tool for drop-in anchors, without visual installation control
Hexagon socket set screw with ring cutter ISO 4029, steel 45H, zinc-plated, blue passivated (A2K)
Metric double-end flare-nut wrench Bi-hex with POWERDRIV®
1/2 inch socket wrench insert metric, hexagon, short
Continuously adjustable one-ear clamp
Plus Quadro-L Vario hammer drill bit