Nautical descaler
Descaler for watercraft
DESCAL-RED-20LTR
Register now and access more than 125,000 products
Features:
- Aggressive product.
- Contains mineral acids and other acids.
- Non-flammable.
- For deep cleaning.
- Direct use on highly contaminated surfaces.
- Features a built-in defoamer.
- Also designed for closed circuits.
- Comes in 1 and 20 litre containers.
- Purple.
Advantages:
- Acts directly on lime, oxide and dirt, exerting a chemical reaction that slowly dissolves them.
- Does not damage any material, including lead, copper and metal, provided the appropriate dose is used, since it acts superficially, using up the product as part of the neutralisation reaction of the deposit.
- Controls the foam produced in the chemical reaction of the sediments when exposed.
Benefits:
- No dangerous vapours are released during use.
- Comes in a very cost-effective 20 litre canister.
In its pure state, it may damage certain types of paint or glass, so performing a pre-test on a concealed area is recommended.
Datasheets(X)
Descaling lime and rust in corroded and calcified parts of the boat, such as propellers, hulls and tails, including parts below the waterline. Also suitable for internal use in pipes, boilers, primary circuits, car washes, dishwashers, air-conditioning units, cooling towers and professional coffee makers.
Mixed with water, varying the dilution depending on the type and thickness of the deposit. Can be used directly by spraying onto parts that have been badly damaged by saltpetre, lime, rust etc. Reference dose (normal dose): 1 litre per 4 or 5 litres of water. Closed circuits must be opened to release any possible carbon dioxide generated.
Colour | Red |
Smell/fragrance | Strong acid |
pH value | <1 |
Chemical basis | 1-hydroxyethylidene)bisphosphonic acid, sodium salt |
Contents | 20000 ml |
Weight of content | 22940 g |
Density/conditions | 1.147 g/ml / at 20°C |
Shelf life from production | 2 Years |
Density conditions | at 20°C |
Density | 1.147 g/ml |
Product weight (per item) | 23108 g |
Last viewed
DUO-S impact drill bit with straight shank
Assembly support
Wood screw Hexagon head DIN 571, A2 stainless steel
TIME-SERT® threaded bushing
ZD 2 handle hole
Electronic solder no. 10
VARIFIX® bracket 36/36
Sheet metal nut, type 4 Shortened rear claw
Soft lead-free electronic solder no. 1 RoHS-compliant
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, plain