Nail with plate UNKT 160
Nail with disk UNKT 160
NL-UNKT160-PLT66MM-32MM
Register now and access more than 125,000 products
- For insulating materials up to approx. 20 mm thick, e.g. bubble film, fleece film
- With nail type HN 101
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shank length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
Datasheets(X)
 | |
Material | Steel |
Surface of the nail | Zinc plated |
Shaft length (SL) | 32 mm |
Head diameter (Ødk) | 8 mm |
Shank diameter (Øds) | 3.7 mm |
Material of disc | PP - Polypropylene |
Disc diameter (ØT) | 66 mm |
Suitable for device type | Würth BST 350, Hilti DX 2, Würth BST MA-75 (single shot kit for single fixtures), Hilti DX 350, DX 36M, DX 460, DX 5 |
Last viewed
Collated nails and gas cartridge NG CS-2/3
Rechargeable battery For EX SLE 15/SLE 15 work lamps and emergency power lamps
Punched flat washer DIN 7989-1, zinc-plated steel, blue passivated, for steel construction
Allen key
Wiggle wire
Cupboard rail, round, welded
Hexagon socket set screw with pin ISO 4028, steel, 45H, plain
HSS annular cutter
Bit holder 100 mm
Wheel hub grinder type A