Nail anchor W-NA-K With nail head - ANC-(W-NA-K)-(A2K)-5-6X39

Nail anchor W-NA-K With nail head - ANC-(W-NA-K)-(A2K)-5-6X39 - 1

Nail anchor W-NA-K With nail head - ANC-(W-NA-K)-(A2K)-5-6X39 - 2

Nail anchor W-NA-K With nail head

Name: Nail anchor W-NA-K With nail head
Brand: Würth
SKU: 0905361005

Nail anchor W-NA-K 6
ANC-(W-NA-K)-(A2K)-5-6X39

Art.-no. 0905361005

EAN 4052703452095

All versions

Similar products

Prices for customers after login

Nail anchor W-NA-K With nail head

Art.-no. 0905361005

Prices for customers after login

Quantity

x 200 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

Quick and easy installation: Position, hammer, done! Ideal for secure mounting of ceiling suspensions, C-profiles and panels. For concrete, with nail head, zinc plated

Quick and easy installation

Less drilling required thanks to reduced effective anchorage depth of 25 mm

Easy insertion: Simply hammer in, no torque required

No special drills or setting tools required

In-place installation

Very low edge distances and spacings possible

Elegant, attractive design

Torque-controlled expanding anchor, expands when subjected to load

Proof of Performance

Multiple anchors in a non-structural system based on a redundant design in concrete: European Technical Approval ETA-11/0339

Fire resistance: R30, R60, R90, R120 (base material: concrete C20/25 to C50/60): "Technical Report TR 020 Evaluation of anchorages in concrete concerning resistance to fire"(included in ETA-11/0339)

Notice

The nail anchor offers the benefits of a bolt anchor while also being easy to install; the nail anchor is simply knocked into the drill hole through the attached part

Application area

Suspended ceilings

Create the drill hole

Clean the drill hole

Insert the nail anchor through the component and knock it in

Drive in the nail anchor until it is flush

Multiple anchors in a non-structural system based on a redundant design in concrete: European Technical Approval ETA-11/0339

Fire resistance: R30, R60, R90, R120 (base material: concrete C20/25 to C50/60): "Technical Report TR 020 Evaluation of anchorages in concrete concerning resistance to fire"(included in ETA-11/0339)

Product information

Würth Catalogue

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

Application area

E.g. lightweight ceiling cladding and suspended ceilings, pipes, cable trays, metal profiles, perforated strips, wire hangers, vernier hangers, wooden strips, wooden laths, square timbers etc.

For use in reinforced or non-reinforced normal weight concrete with a concrete compressive strength of min. C12/15 and max. C50/60 in accordance with EN 206-1:2000-12

May only be used in dry indoor room conditions

Anchor diameter	6 mm
Anchor length (l)	39 mm
Min./max. height of the fixture (t fix)	0-5 mm
Nominal drill-bit diameter (d 0)	6 mm
Effective anchoring depth (h ef)	30 mm
Effective anchoring depth reduced (h ef, red)	25 mm
Drill hole depth (h 0)	40 mm
Drill hole depth reduced (h 0, red)	35 mm
Minimum component thickness (h min)	80 mm
Through-hole in the component to be connected (d f)	7 mm
Material	Steel
Surface	Zinc plated

Anchor diameter [mm]		6 (h_ef [mm] = 25)	6 (h_ef [mm] = 30)
Anchors in concrete in a non-structural system based on a redundant design (for all load directions) for c ≥ 100 mm and s ≥ 200 mm	F_adm [kN] ≥ C12/15	1,4	1.9³⁾
	F_adm [kN] ≥ C20/25 and ≤ C50/60 ¹⁾	2.1³⁾	2.8³⁾
Anchors in concrete in a non-structural system based on a redundant design (for all load directions) for c ≥ 50 mm and s ≥ 100 mm	F_adm [kN] ≥ C12/15	0,7	1,0
	F_adm [kN] ≥ C20/25 and ≤ C50/60 ¹⁾	1,0	1,2
Permissible bending moment	M_perm[Nm]	7,3	7,3
Perm. load under exposure to fire (Technical Report TR 020) for axis and edge distances, see European Technical Assessment ETA-11/0339	R30; F_adm [kN] ²⁾	0,6	0,9
	R60; F_adm [kN] ²⁾	0,6	0,8
	R90; F_adm [kN] ²⁾	0,6	0,6
	R120; F_adm [kN] ²⁾	0,5	0,5
¹⁾ The partial safety factors of the resistances regulated in the approval and a partial safety factor of the effects of γ_F = 1.4 have been taken into account. Please refer to the European Technical Approval Guidelines (ETAG), Annex C, for information on combining tensile and shear loads, influence of the edge distance and groups of anchors. ²⁾ The partial safety factors for load capacity under exposure to fire of γ_M,fi= 1.0 as recommended in the approval and the partial safety factor of the effects of γ_F = 1.0 have been taken into account. ³⁾ Tungsten carbide hammer drill bits must comply with the specifications set out in the information leaflet of the Deutsches Institut für Bautechnik (German Institute of Civil Engineering - DIBt) and the Association of German Tool Manufacturers (FWI) on the "characteristic values, requirements and tests for masonry drill bits with tungsten carbide cutting body which are used for making drill holes for anchoring". Würth hammer drill bits meet the specifications set out in the information leaflet.

Minimum member thickness	h_min [mm]	80	80
Effective anchorage depth	h_ef [mm]	25	30
Nominal drill dia. ³⁾	d₀ [mm]	6	6
Cutting edge dia. ³⁾	d_cut ≤ [mm]	6,4	6,4
Drill hole depth	h_0≥ [mm]	35	40
Through hole in the component being connected	d_f ≤ [mm]	7	7
³⁾ Tungsten carbide hammer drill bits must comply with the specifications set out in the information leaflet of the Deutsches Institut für Bautechnik (German Institute of Civil Engineering - DIBt) and the Association of German Tool Manufacturers (FWI) on the "characteristic values, requirements and tests for masonry drill bits with tungsten carbide cutting body which are used for the manufacture of drilled holes for anchoring". Würth hammer drill bits meet the specifications set out in the information leaflet.