Nail anchor SHARK^®Hammer TYPE SK

Name: Nail anchor SHARK ® Hammer TYPE SK
Brand: Würth
SKU: 590631680

SHARK HAMMER nail anch. cntrsnk cl type SK
DWL-(SHARK HAMMER)-SK-PLA-NL-50-6X80

Art.-no. 590631680

EAN 4061975320285

All versions

Specification

With fast assembly and proven performance, this product offers an all-round solution for fastening light loads using in-place installation. Wall plug body with countersunk, nail made of zinc-plated steel

Quick, cost-effective installation

Anchor and nail screw are pre-assembled, no need to search for a suitable screw

Suitable for in-place installation

Can be removed via drive in screw head

Defined integrated hammer-in stop prevents premature expansion

Resistant to UV rays

Rot-resistant (plastic anchor made of high-quality polyamide)

Temperature-resistant from -40°C to +100°C

For countersunk and protruding finish

Countersunk head design countersinks itself automatically in soft wood

Halogen-free

Proof of Performance

European Technical Assessment ETA-19/0182: SHARK^®Hammer sizes 6 and 8 for multiple use in concrete for non-structural applications

European Technical Assessment ETA-19/0182: SHARK^®Hammer 8 for multiple use in masonry for non-structural applications (exception: dimensions M8 x 45)

Performance data
Characteristic values
Anchor diameter [mm]			6	8
Permissible tensile load	Concrete B25 or C20/25	Fperm [kN]	0,2	0,2
	Sand-lime brick KS 12		–	0,12
	Hollow sand-lime brick KSL 12		–	0,075
Tightening torque (THREAD type only)		T_{i_nst}[Nm]	4	4
Drill hole depth		h₁ ≥ [mm]	35	45
Setting depth		h_nom ≥ [mm]	30	40
Thread dia. (THREAD type only)		d_thr [mm]	M6	M8
Thread length (THREAD type only)		I_thr [mm]	6	9
Nom. drill dia.		d₀ [mm]	6	8
Hole dia. in comp.		d_f [mm]	6,5	8,5

Application area

Square timbers

Drill the hole

Remove drill cuttings

Anchor sleeve temperature ≥ 0 °C

Temperature in base material ≥ 0 °C

Insert anchor through the component into the drilled hole

Knock in expansion nail until flush

European Technical Assessment ETA-19/0182: SHARK^®Hammer sizes 6 and 8 for multiple use in concrete for non-structural applications

European Technical Assessment ETA-19/0182: SHARK^®Hammer 8 for multiple use in masonry for non-structural applications (exception: dimensions M8 x 45)

Application

Application area

Can be used in concrete and masonry

For any light-load fittings in interior finishing as well as wood, metal, plumbing, sanitary and electrical applications, e.g. securing squared timber, laths, thin metal sheets and all components for recessed installation

Technical information

Anchor diameter	6 mm
Anchor length (l)	80 mm
Max. attachment height (t fix)	50 mm
Embedding depth (h nom)	30 mm
Nominal drill-bit diameter (d 0)	6 mm
Drill hole depth (h 1)	35 mm
Hole diameter in component (d f)	6.5 mm
Material of nail	Steel
Surface	Zinc plated
Internal drive	Z2