Nail anchor SHARK<SUP>® </SUP>Hammer TYPE FK - DWL-(SHARK HAMMER)-FK-PLA-NL-10-6X40

Nail anchor SHARK<SUP>® </SUP>Hammer TYPE FK - DWL-(SHARK HAMMER)-FK-PLA-NL-10-6X40 - 1

Nail anchor SHARK<SUP>® </SUP>Hammer TYPE FK - DWL-(SHARK HAMMER)-FK-PLA-NL-10-6X40 - 2

Nail anchor SHARK<SUP>® </SUP>Hammer TYPE FK - DWL-(SHARK HAMMER)-FK-PLA-NL-10-6X40 - 3

Nail anchor SHARK<SUP>® </SUP>Hammer TYPE FK - DWL-(SHARK HAMMER)-FK-PLA-NL-10-6X40 - 4

Nail anchor SHARK^®Hammer TYPE FK

Name: Nail anchor SHARK ® Hammer TYPE FK
Brand: Würth
SKU: 590630640

SHARK HAMMER nail anchor flat collar type FK
DWL-(SHARK HAMMER)-FK-PLA-NL-10-6X40
ZEBRA-SHARK

Art.-no. 590630640

EAN 4061975319937

All versions

Similar products

Prices for customers after login

Nail anchor SHARK^®Hammer TYPE FK

Art.-no. 590630640

Prices for customers after login

Quantity

x 200 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

With fast assembly and proven performance, this product offers an all-round solution for fastening light loads using push-through installation. Wall plug body with flat collar nail made of zinc plated steel

Quick, cost-effective installation

Anchor and nail screw are pre-assembled, no need to search for a suitable screw

For use in push-through installation

Can be removed via drive in screw head

Defined integrated hammer-in stop prevents premature expansion

Resistant to UV rays

Rot-resistant (plastic anchor made of high-quality polyamide)

Temperature-resistant from -40°C to +100°C

For countersinking and leaving protruding

Countersunk head design countersinks itself automatically in soft wood

Halogen-free

Proof of Performance

European Technical Assessment ETA-19/0182: SHARK^®Hammer sizes 6 and 8 for anchors in a non-structural system based on a redundant design in concrete

European Technical Assessment ETA-19/0182: SHARK^®Hammer 8 for anchors in a non-structural system based on a redundant design in masonry (exception: dimensions M8 x 45)

Performance data
Anchor diameter [mm]			6	8
Permissible tensile load	B25 or C20/25 concrete	Fadm [kN]	0,2	0,2
	Sand-lime brick KS 12		-	0,12
	Hollow sand-lime brick KSL 12		-	0,075
Characteristic values
Tightening torque (THREAD type only)		T_{i_nst}[Nm]	4	4
Drill hole depth		h₁ ≥ [mm]	35	45
Embedment depth		h_nom ≥ [mm]	30	40
Thread dia. (THREAD type only)		d_thr [mm]	M6	M8
Thread length (THREAD type only)		I_thr [mm]	6	9
Nominal drill diameter		d₀ [mm]	6	8
Hole diameter in component		d_f [mm]	6,5	8,5

Application area

C-profile rails in dry walling

Cable ducts

Drill the hole

Remove drill cuttings

Anchor sleeve temperature ≥ 0 °C

Temperature in base material ≥ 0 °C

Insert anchor through the component into the drilled hole

Knock in expansion nail until flush

European Technical Assessment ETA-19/0182: SHARK^®Hammer sizes 6 and 8 for anchors in a non-structural system based on a redundant design in concrete

European Technical Assessment ETA-19/0182: SHARK^®Hammer 8 for anchors in a non-structural system based on a redundant design in masonry (exception: dimensions M8 x 45)

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Can be used in concrete and masonry

All fastenings in interior finishing as well as the wood, metal, plumbing, sanitation and electrical industries. For light loads

Uses include: securing angle brackets, panels, metal sheets, cable ducts and any components for non-recessed installation

Anchor diameter	6 mm
Anchor length (l)	40 mm
Max. attachment height (t fix)	10 mm
Embedding depth (h nom)	30 mm
Nominal drill-bit diameter (d 0)	6 mm
Drill hole depth (h 1)	35 mm
Hole diameter in component (d f)	6.5 mm
Material of nail	Steel
Surface	Zinc plated
Internal drive	Z2

Nail anchor SHARK^®Hammer TYPE FK including:

600 x

Nail anchor/punched mounting strip set

PD SP 2020

Description: 630 pieces

Quantity: 600 x

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).