Nail UNS 104 In accordance with DIN EN 206
UNS 104 nail
NL-UNS104-DISC23MM-90MM
Register now and access more than 125,000 products
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shank length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile strength of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
Datasheets(X)
 | |
Material of nail | Steel |
Surface of the nail | Zinc plated |
Material of washer | Steel |
Surface of the washer | Zinc plated |
Washer thickness | 2 mm |
Shaft length (SL) | 90 mm |
Shank diameter (Øds) | 3.7 mm |
Washer diameter (ØS) | 23 mm |
Head diameter (Ødk) | 8 mm |
Suitable for device type | Würth BST 350, Hilti DX 2, Hilti DX A41, Würth BST MA-75 (single shot kit for single fixtures), Hilti DX 350, DX 36M, DX 460, DX 5 |
Last viewed
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
Electronic solder no. 10
Hook For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems
Hexagon nut DIN 934, steel I10I, zinc-plated, blue passivated (A2K)
Fluorescent high-visibility trousers, class 2
1/2 inch socket wrench insert metric, hexagon, short
Hexagonal bolt with shank DIN 931, steel 10.9, plain
Drill BM 10-E COMPACT
Earth pipe clamp, copper For conductor cross-sections up to max. 16 mm²
Plastic multi-purpose Zebra Shark® anchor without collar