Nail UNS 104 In accordance with DIN EN 206
UNS 104 nail
NL-UNS104-DISC23MM-32MM
Register now and access more than 125,000 products
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shank length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile strength of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
Datasheets(X)
 | |
Material of nail | Steel |
Surface of the nail | Zinc plated |
Material of washer | Steel |
Surface of the washer | Zinc plated |
Washer thickness | 2 mm |
Shaft length (SL) | 32 mm |
Shank diameter (Øds) | 3.7 mm |
Washer diameter (ØS) | 23 mm |
Head diameter (Ødk) | 8 mm |
Suitable for device type | Würth BST 350 |
Last viewed
1/4-inch socket wrench insert For TX screws
Holder For small abrasives
Spare blade For cutting pliers
Spring For slate cutters
Hexagon drive For Fixograss 9000 drilling jig, SBL-3 and VBL-2
TIPP® A4 stainless steel pipe clamp 2 pieces
Threaded pin For furniture castors with mount type W
ASSY® D
plug screw Pan head, without drill tip
Watch
Countersunk head screw with recessed head, H DIN 965, A2 stainless steel, plain