NP profile thumbturn cylinder In 6-pin system
Profile thumbturn cylinder, NP
PRFLCYL-NP-KN-6PIN-GS1-(NI)-DL-35X50MM
Register now and access more than 125,000 products
Can be used for all common doors
Type of closure can be selected: varied or simultaneous locking
With special pins and paracentric key profile
This makes the unauthorised opening of the locking cylinder with picking tools considerably more difficult
Not suitable for use in fire protection closures
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Type of closure | Keyed alike |
Closure | GS 1 |
Key number | RW14894 |
Emergency and danger function (lockable on both sides) | Yes |
External length x internal length (A / B) | 35 x 50 mm |
Length (C) | 85 mm |
Material | Brass |
Surface | Nickel plated |
Gloss level | Matt |
Material of keys | Brass |
Surface of the key | Nickel plated |
Number of keys | 3 PCS |
Standards | EN 1303:2005, DIN 18252 |
Last viewed
Nylon brush
Metric double open-end wrench DIN 3110/ISO 1085
Plastic multi-purpose ZEBRA Shark® anchor with collar
Plastic mushroom seal
Non-woven tape, re-sealable
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Cetus shorts
Blade scraper with blade holder
Zinc balancing weight Shape 82-Z
Sealing ring, copper, shape A