Mortar additive POLTEX
Mortar additive POLTEX
MORTADD-CNST-POLTEX-WHITE-5LTR
Register now and access more than 125,000 products
Mixing with water results in:
- Increased adhesion and mechanical characteristics of the mortar.
- The creation of adhesion bridges.
- Increased resistance to compression, traction, flexion, abrasion and impact.
- Greater flexibility and plasticity.
- Reduces shrinkage.
- High impermeability.
- Anti-dust, eliminates the tendency for dust to form on concrete.
- Reduces the risk of cracking.
- Improves chemical resistance.
- Resistant to freeze-thaw cycles.
- Non-toxic.
Datasheets(X)
Poltex is a reactive emulsion that is mixed with water for use as a sealant and to prepare mortar, with the following applications:
Adhesion grout and filler.
Mortar for plastering and coatings with great rainwater impermeability.
Reinforced mortar for repairs.
General masonry mortars.
Levelling mortars so that they meet level with adjacent surfaces.
As an adhesion grout between new and old mortars.
Dust-proof surfaces with high chemical, wear and impact resistance.
Adhesive mortar for traditional ceramic tile installation.
Construction joint filler mortar.
Sealing of plaster surfaces, plasterboard, cement plaster, bricks.
Contents | 5 l |
Colour | Milky white |
Chemical basis | Acrylic resin |
Product weight (per item) | 5.280 kg |
| Technical data | |
| Specific weight | 1 ± 0.02 g/cm³ |
| Appearance | Milky white liquid |
| Dry film appearance | Transparent, flexible and tacky |
| Viscosity at 20°C | 15 inch Ford Cup no. 4 |
| Solid content | 50 % |
| pH | 5-6 |
| Flash point | Greater than 100ºC Non-flammable |
| Approx. consumption | Depending on absorption and use |
| Dilution with water | 1 part Poltex weight + 3 parts water weight |
| Tool cleaning | With water, immediately after use |
| Application | Brush, roller, trowel |
| VOC | 1 g/l - 2010 standard, 30 g/l |
