Metal insulation dowel W-MDD
Steel insulation anchor W-MDD
DWL-(W-MDD-R)-A2-D35MM-(70-100)-8X140
Register now and access more than 125,000 products
- Permitted loads under exposure to fire R30; R60; R90; R120.
- Tested fire resistance
- When attaching soft insulation materials that are not self-supporting, the insulation disc is simply pushed onto the insulation anchor.
- Quick and secure mounting thanks to 2-part construction
- Knock-in shaft has the design of a clamping sleeve and braces along the entire installation depth in the drill hole
- Surface of anchor head suitable for use as a plaster base
The insulation panels must be fastened with at least 4 anchors per square metre.
Datasheets(X)
With a German construction permit, the anchor may be used in a multiple attachment configuration to anchor insulation panels in cracked and non-cracked standard concrete with a strength class of at least C20/25 and max. C50/60.
Last viewed
Metric combination wrench with POWERDRIV®
RALI® plane 220
Crimping tool with parallel loading
High-visibility fleece SINGLE COLOUR
3/8-inch socket wrench For TX screws, short
Chuck For hand-lever grease guns
Flat cover cap, for hexalobular socket and AW drive
Curved saw SF3
Shelf support
Shelf support with guide pin