Metal dowel W_HR zinc-plated
Sleeve anchor W-HR zinc plated hexagon screw
ANC-(W-HR/D)-(A2K)-M12-30-16X110
Register now and access more than 125,000 products
Advantages
- Quick assembly
- Immediately resistant, no waiting time required
- Anti-rotation sleeve anchor
- Built-in anti-rotation rubber washer (PVC).
- Anti-rotation cone
- Handy sleeve anchor in its full length
Characteristics
- Type S ZN: Hexagon screw anchor DIN 931 6.8 zinc-plated A2J (>5 microns)
- Type S A2: Hexagon screw anchor DIN 931 A2/70
- Type SK ZN: Countersunk screw anchor DIN7991 10.9 zinc-plated A2J (>5 microns)
- Type SK A2: Countersunk screw anchor DIN7991 stainless steel A2/70
Datasheets(X)
- Suitable for medium loads
- Resistance data suitable for C20/25 compact concrete
- Suitable for cross assembly
- The anchor can be used for predominantly static load attachments (e.g. own weight, installation, storage) or almost static load attachments
- Can be installed in dry or wet concrete
- Indoors or in a dry environment: Galvanised steel
- Outdoors or in a wet or saline environment: Stainless steel A2
- Suitable for attaching metal constructions, metal profile frames, consoles, supports, ports, shelving, signs, awnings, railings, wooden constructions, etc.
Drill diameter | 16 mm |
Yta | Zinc plated |
Minimum component thickness (h min) | 135 mm |
Typbeskrivning | W-HR |
Torque during anchoring (T inst) | 50 Nm |
Last viewed
Adjusting ring DIN 705, shape A and DIN 553 set screw, steel, plain
Chipping hammer MH 10-SE
Wood screw Hexagon head DIN 571, A4 stainless steel
Extension hose Made of plastic for ISS and TSS series
Complete unprinted Clipster number plate holder
Unprinted Klapp-Fix Plus number plate holder
Screwdriver, 1/4 inch With quick-change chuck
Professional submersible pump WP-75
Amo® III 7.5 type 3 window frame screw Half round head, zinc plated steel, blue passivated, RW 30 drive
Pressure reducing valve