Metal anchor W-HR A2
Sleeve anchor W-HR stainless steel A2 hex screw
ANC-(W-HR/D)-A2-M12-30-16X110
Register now and access more than 125,000 products
Advantages
- Quick assembly
- Immediately resistant, no need to wait
- Anti-rotation sleeve anchor
- Built-in anti-rotation rubber (PVC) escutcheon.
- Anti-rotation cone
- Sleeve anchor useful in its full length
Characteristics
- Type S ZN: Hex screw DIN 931 6.8 zinc-plated A2J (>5 microns)
- Type S A2: Hex screw DIN 931 A2/70
- Type SK ZN: Countersunk screw DIN7991 10.9 zinc-plated A2J (>5 microns)
- Type SK A2: Countersunk screw DIN7991 stainless steel A2/70
Datasheets(X)
- Suitable for medium loads
- Strength data suitable for C20/25 compact concrete
- Suitable for through fitting
- The anchor can be used to secure predominantly static loads (e.g. own weight, installations, storage) or almost static loads
- Can be installed in dry or wet concrete
- Indoors or in a dry environment: Galvanised steel
- Outdoors or in a wet or saline environment: A2 stainless steel
- Suitable for attaching metal constructions, metal profile frames, consoles, supports, ports, shelving, signs, awnings, railings, wooden constructions etc.
Drill diameter | 16 mm |
Surface | Plain |
Minimum component thickness (h min) | 135 mm |
Type description | W-HR |
Torque during anchoring (T inst) | 50 Nm |
Last viewed
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Refuse bag Without pull tie
Copper manifold
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
Contact tip MB 15 AK MB 15 AK For welding torch MB 15 AK
1/4" extension
Universal ball joint puller, commercial vehicles
Machinist's hammer German design in accordance with DIN 1041
Cable grommet for standard cable connector box
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-plated, blue passivated (A2K)