Medium-strength and non-running flange sealant - FLGSEAL-DOS-FLW-50G

Medium-strength and non-running flange sealant - FLGSEAL-DOS-FLW-50G - 1

Medium-strength and non-running flange sealant - FLGSEAL-DOS-FLW-50G - 2

Medium-strength and non-running flange sealant - FLGSEAL-DOS-FLW-50G - 3

Medium-strength and non-running flange sealant - FLGSEAL-DOS-FLW-50G - 4

Medium-strength and non-running flange sealant

Name: Medium-strength and non-running flange sealant
Brand: Würth
SKU: 0893518050

Flange sealant medium-strength and non-dripping
FLGSEAL-DOS-FLW-50G

Art.-no. 0893518050

EAN 4045989342990

All versions

Similar products

Prices for customers after login

Medium-strength and non-running flange sealant

Art.-no. 0893518050

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

Viscous adhesive and sealing material for sealing flanges and surfaces with large gaps

Viscous product

The material does not drip or run, which makes it ideal for overhead work and for working on vertical surfaces.

100 % seal

Gaps are completely filled so that the resulting bonding provides protection against corrosion caused by friction and protection against rust.

Slight flexibility

Compensates expansion difference between different materials.

Immediate seal even under low compressive load

Test pressure can be applied immediately. Therefore, there are no waiting times.

Also suitable for passive metals

Aluminium flanges can also be sealed

One product for a multitude of materials.

Fast curing

Short service life

The accordion bottle makes it easy to empty residual product

Resistant to a large number of bases, gases, solvents, oils and fuels

Silicone-free, solvent-free and oil-free

Notice

The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre and painted surfaces. We always recommend that you conduct your own tests.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For sealing dimensionally stable flange joints and surfaces with a large gap. Also suitable for passive metals, such as for sealing aluminium flanges or for different material pairs. Ideal for automotive and commercial vehicle industry, metalworking and tool manufacturing, shipbuilding, mechanical engineering and engine construction, electrical and electronics construction.

Instructions

This liquid plastic cures when exposed to oxygen and in combination with metal contact. The bonding surfaces must be dry,

dust- and grease-free. Wet the adhesive surfaces sufficiently and join them immediately.

For more information, please refer to the technical data sheet.

Weight of content	50 g
Chemical basis	Methacrylic acid ether
Fully hardening/curing conditions	Exclusion of oxygen and contact with metal (copper or iron ions)
Colour	Red fluorescent
Min./max. viscosity 1 /conditions 1	1500000-2300000 mPas / at 25°C, Brookfield RVT, spindle 7/0.5 rpm
Min./max. viscosity 2 /conditions 2	160000-360000 mPas / at 25°C, Brookfield RVT, spindle 7/5 rpm
Density/conditions	1.1 g/cm³ / in accordance with DIN EN ISO 2811-1
Min./max. initial strength	30-60 min
Min./max. functional strength	1-3 h
Min./max. final strength	24 h-72 h
Min./max. processing temperature	5 to 35 °C
Min./max. temperature conditions	-55 to 150 °C
Min. flashing point	90 °C
Min. prevail torque	8 Nm
Conditions for prevail torque	DIN EN 15865
Min./max. compressive shearing strength /conditions	18-27 N/mm² / in accordance with ISO 10123
Min./max. tensile strength /conditions	14-20 N/mm² / in accordance with DIN 53288
Min. breakaway torque	20 Nm
Breakaway torque conditions	DIN EN 15865
Shelf life from production/conditions	18 Month / at room temperature
Silicone-free	Yes
Solvent-free	Yes

Additional accessory:

Product

Description

Quantity

Price
/PU

Tex-Rein cleaning cloth

CLNCLTH-(TEX-REIN)-27X38CM-150PCS

Art.-no. 0899810

Extra fine cleaning cloth for dust and lint-sensitive areas

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).