Masker dispenser with tear-off blade
Dispenser Masker
DSP-TPE-MASKER-DISPENSER
Register now and access more than 125,000 products
Highly flexible in the manufacture of protective masks
- Adhesive tape and masking paper can be combined as required
- Variable adhesive tape and masking paper width
Robust structure
- High-quality metal housing with plastic handle
- Replaceable tear-off rail with long-life special blade
Protective strip left on blade for when not in use or installing, to prevent injuries. Masking paper max. width 300 mm, adhesive tape 50 mm.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For masking for painting work, e.g. for protecting window sills
Width | 360 mm |
Length | 240 mm |
Last viewed
Wheel hub grinder type B
Hexagon nut, flat profile with fine thread DIN 936, steel, plain
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Universal switch cabinet key, 10-in-1
Hand tap, taper tap HSS DIN 352
1/4-inch socket wrench insert For TX screws
Dust protection filter for angle grinder
Spirit level with two handles
C 6.3 TX bit (1/4 inch)
WLH 1 Premium cordless LED hand-held lamp