Marine grease
Multipurpose grease Marine
GRSE-MARITIM-400G
Register now and access more than 125,000 products
- Insoluble in water and steam
- Use on equipment operating in fresh water and salty water
- Good splash resistance
- Considerably improves the operating conditions of many mechanisms requiring lubrication
- Synthetic macromolecule-based formulation enhanced by the addition of PTFE
- Improves the friction coefficient
- Work at high temperatures possible
- Good adhesion to metal
- Allows less frequent greasing
- Excellent mechanical stability
- Excellent extreme pressure (EP) properties, suitable for lubricating bearings under load
- Very good resistance to vibrations
- Very good resistance to external chemicals and corrosion
Datasheets(X)
Specially developed for intensive use in the merchant navy, leisure marine sector, commercial ports, waterways
Ideal grease for humid and salty environments. Suitable for lubricating parts subject to water spray, for bearings, rollers, pumps, chains
For best performance, make sure that the surfaces and mechanical parts to be treated are clean and free from any oxidised or old grease
Use with a manual, pneumatic or battery-powered grease gun. Store vertically in its original packaging, closed, if possible, in a clean, dry and cool environment
Weight of content | 400 g |
Container | Cartridge |
Soap base | Lithium/calcium |
Lubricant code | KP2N-20 |
Min./max. temperature conditions | -20 to 140 °C |
Colour | Blue |
Base oil viscosity, kinematic/conditions | 500 mm²/s / at 40°C |
Min./max. worked penetration /conditions | 265 x 0.1 mm-295 x 0.1 mm / in accordance with ASTM D 217 |
Corrosion protection period/category | Corrosion category 0 |
VKA welding load | 3150 N |
Shelf life from production | 60 Month |
Oil basis | Synthetic mineral oil |
Lubricant system | Grease |
Smell/fragrance | Product-typical |
Density | 0.9 kg/l |
Density conditions | at 20°C |
Conditions for viscosity of oil basis | at 40°C |
Min. temperature conditions | -20 °C |
Max. temperature conditions | 140 °C |
Max. short-term temperature resistance | 140 °C |
Worked penetration conditions | in accordance with ASTM D 217 |
Conditions for NLGI grade | 0 - not applicable |
Corrosion protection period conditions | depends on the application |
Conditions for VKA welding load | 0 - not applicable |
Resin-free | Yes |
Silicone-free | Yes |
Acid-free | Yes |
Free from heavy metals | Yes |
Chloric | No |
Resistance against | Salt water |
Last viewed
PZ laser tip screwdriver with hexagon shank
Lock for tool case
Short adapter Mini 13-pin to 7-pin 12V
Allen key
Blade scraper With ergonomic, slip-free 2-component handle
Compression spring clamping jaw for HNG 26 lever riveters
Safety shoe S2
Small abrasives mini compact fleece disc
Electronic round-nose pliers
Hand tap, second tap HSS DIN 352