Maintenance spray

Name: Maintenance spray
Brand: Würth
SKU: 0893051

Maintenance spray
MAINTSPR-150ML

Art.-no. 0893051

EAN 4045989911950

All versions

Similar products

Prices for customers after login

Maintenance spray

Art.-no. 0893051

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

For lubricating hinges, tool mounts and machine mounts

Highly effective wear protection additives guarantee optimal friction reduction

Prevents premature wear and seizure of hammer drills in machine mounts.

Excellent penetration and cleaning performance

Keeps door and window hinges running smoothly

Lubricates and preserves all precision-engineered parts

Resin-free and acid-free

Sensitive components are not corroded.

Silicone-free

Also suitable for use as gun oil

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For lubricating hinges and tool and machine mounts.

Instructions

Spray the lubricating points to be treated.

Contents	150 ml
Chemical basis	Mineral oil
Colour	Light brown
Min./max. temperature conditions	-15 to 150 °C
Shelf life from production	24 Month
Min. temperature conditions	-15 °C
Max. temperature conditions	150 °C
Min. flashing point	-26 °C
Silicone-free	Yes
Acid-free	Yes
Resin-free	Yes
AOX-free	Yes
VOC concentration (CH)	50.72 %
Kinematic oil basis viscosity	29.5 cSt
Conditions for viscosity of oil basis	at 40°C
Container	Aerosol can
Weight of content	107 g
Conditions to maintain shelf life from production	at 20°C

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.