Welcome to Würth Canarias For trade customers only

Maintenance oil Multi

Maintenance oil multi
MAINTOIL-MULTI-400ML

Art.-no. 089305540
EAN 4045989903542

Prices for customers after login
Maintenance oil Multi

Art.-no. 089305540

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Versatile multi-functional spray for a range of applications

Lubricates, cleans and maintains


  • Lubricates locks, hinges, bushings, chains, door locks

  • Stops creaking and squeaking and restores sliding properties of seized and jammed parts

  • Cleans and maintains plastic and metal parts such as e.g. panelling and housing


Removes rust and protects against corrosion


  • Loosens rusted bolts, pipe fittings, screws, nuts, joints, Bowden cables, shafts, locks etc.

  • Infiltrates and displaces moisture around electronics and electrics

  • Prevents corrosion on metals and electrical components, cable connections, relays, plugs, couplings etc.

  • Prevents freezing up of lock cylinders and closures


Resin, acid and silicone-free



Does not attack rubber, paint or plastics

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Versatile multi-purpose spray

Instructions

Shake the can before use, spray the parts and let it take effect briefly. After using, spray the can upside down until it is empty.

Contents

0.4 l

Chemical basis

Mineral oil

Colour

Light yellow transparent

Min./max. processing temperature for can

-10 to 40 °C

Min./max. temperature conditions

-30 to 130 °C

Shelf life from production

24 Month

Min. processing temperature for can

-10 °C

Type of spray head

Standard spray head

Max. processing temperature for can

40 °C

Min. temperature conditions

-30 °C

Max. temperature conditions

130 °C

Min. flashing point

-80 °C

Silicone-free

Yes

Acid-free

Yes

Resin-free

Yes

AOX-free

Yes

White oil-free/mineral oil-free

No

VOC concentration (CH)

76.57 g/l

Kinematic oil basis viscosity

30 cSt

Material compatibility

NBR

Conditions for viscosity of oil basis

at 40°C

Container

Aerosol can

Weight of content

270 g

Conditions to maintain shelf life from production

at 20°C

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information