MS Easy Tack structural adhesive
Structural adhesive MS Easy Tack
STRUCADH-MS-EASYTACK-SAPELE-290ML
Register now and access more than 125,000 products
For universal use
Excellent adhesion on a wide range of materials.
Easy to use
Can be used without primer on the most common surfaces such as metal, glass and aluminium.
Free of solvents, silicone, alkalis, acids and isocyanate
Can be coated and painted
Can be coated and painted over (due to the variety of paints and coatings available on the market, we always recommend performing compatibility and adhesion tests in advance)
Weatherproof, UV-resistant and colour-fast
Odourless and very low in emissions
EC1+ certified (EMICODE EC1 Plus)
Standards and certifications
- DIN EN 15651 - 1: Type F-EXT-INT, class 20HM CC
- DIN EN 15651 - 3: XS3 design
- DIN EN 15651 - 4: Type F-EXT-INT, class 20HM CC
- EMICODE EC1 Plus
Good resistance to water, aliphatic solvents, hydrocarbons, ketones, esters, alcohols, diluted mineral acids, alkalis and salt water.
All surfaces must be clean and free of release agents, grease, oil, dust, water, adhesives and sealants remnants and other substances that could affect adhesion.
Does not adhere to PE, PP, PC, PMMA, PTFE, soft plastics, neoprene and bituminous surfaces.
Apply the adhesive in vertical lines (for air circulation) with a minimum distance of 10 cm and a maximum distance of 20 cm. Do not apply the adhesive as dots.
Not recommended for use as a glazing sealant and not suitable for adhesive applications in aquariums.
Datasheets(X)
Contents | 290 ml |
Container | Cartridge |
Chemical basis | Silane modified polymer |
Colour | Sapelly |
Density/conditions | 1.50 g/cm³ / at 23°C, 50% relative humidity |
Min./max. processing temperature | 0 to 40 °C |
Min./max. temperature resistance | -40 to 90 °C |
Min. tensile strength | 2.3 N/mm² |
Shelf life from production/conditions | 12 Month / at 5°C to 30°C |
Silicone-free | Yes |
Solvent-free | Yes |
Isocyanate-free | Yes |
Last viewed
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Nail anchors
1/2 inch impact socket wrench insert hexagon, metric, short
Hand tap, second tap HSS DIN 352
Pan head tapping screw, C shape with H recessed head DIN 7983, steel, zinc-plated, blue passivated (A2K), shape C, H cross recess
Premium spade chisel with SDS-max drive arbour
360° Pump spray bottle
1-ear clamp with insert ring
Cable feed device CPS 3
Wire end ferrule with plastic sleeve