MASTERKOL C2 TE S1
ADH-TLE-(MASTERKOL-C2-T)-WHITE-25KG
Art.-no. 5875100452
EAN 4046777396188
Register now and access more than 125,000 products
- Excellent initial adhesion and maximum adhesion after 28 days.
- Suitable for vertical and horizontal surfaces.
- Sufficient elasticity to absorb small movements between the tiles and the base.
- Resistant to industrial environments.
- Does not age when exposed to the elements.
- Perfectly resists immersion in water and thermal changes.
- C2 TE S1 EN-12.004 classification
- Does not sag.
Amount used
- On smooth surfaces: from 2 to 3 kg/m².
- On plaster: from 3 to 3.5 kg/m².
- For double bonding: from 5 to 6 kg/m².
Storage:
For 12 months from date of manufacture. In its original sealed container, stored in a cool, dry place. Protect from light, frost and excessive heat.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
Datasheets(X)
Fixing any type of ceramic (tile, stoneware, porcelain stoneware) in the following applications:
- On concrete or mortar supports, concrete or brick masonry.
- On plaster or gypsum plasterboard panels (apply a layer of Uniresin (art. no. 0893 210 500/0893 540 21) beforehand, except for water-resistant panels where this step is not necessary).
- On dividing walls, walls.
- Facades (in accordance with standard UNE-EN 138.002).
- Indoor flooring and outdoor paving, including in the case of high foot traffic (commercial areas, airports, hospitals, schools).
- Heated flooring.
- Indoor overlaying applications.
- On top of Würth waterproofing systems:
Multimortar (art. no. 0890 353 015) / Pressulastic (art. no. 0890 350 301) / Elasticproof (art. no. 0890 353 020) / Elastproof (art. no. 0890 353 003) / Sealproof (art. no. 0892 300..) / Acueproof (art. no. 0892 200..) / Impelast (art. no. 0893 220..) / Witanflex (art. no. 0893 220 23..) / Cerafix 525 (art. no. 5875 100 525).
- In pools and tanks both directly on the vessel support (concrete or mortar) and on the Würth waterproofing systems:
Multimortar (art. no. 0890 353 015) / Pressulastic (art. no. 0890 350 301) / Elasticproof (art. no. 0890 353 020) / Elastproof (art. no. 0890 353 003).
- Also for fixing natural stone on dividing walls, walls or facades (in accordance with UNE-EN 138.002).
- In general for fixing ceramic both inside (bathrooms, floors, kitchens) and outside (terraces, patios, facades), including in swimming pools.
• Substrates must always be strong, solid, and free from dust, paint, wax and oil.
• Mix 6 litres of water per 25 kg bag.
• Mix with an electric beater to a smooth, lump-free paste.
• Let stand for 2 minutes and mix again before applying.
• Spread the paste with a toothed trowel with teeth sized according to size of the ceramic tiles to be laid. Spread the paste in sections not exceeding 2 m² and comb it with the toothed trowel in a straight line, perpendicular to an edge of the tile and before laying the tiles: the less time taken between combing the paste and laying the tile, the better the adhesion will be. Then, firm up all the tiles by tapping them with a rubber club hammer.
• Tiles can still be worked on up to 30 minutes after spreading the paste.
• Min. application temperature 5°C and max. 35°C.
• It can totally withstand traffic for grouting after 24 hours.
It is essential to follow the specifications of Chapter 7.4. of the EN 138.002 standard when laying on façades. Use the double bonding technique. If the tiles are larger than 30 x 30 cm, use stainless steel metal anchors as well.
Weight of content | 25 kg |
Chemical basis | Cement |
Colour | White |
Min./max. processing temperature | 5 to 35 °C |
Last viewed
Sealing tape CERAfix®526
1/4" T-handle
Frame section for WF rebated interior doors
Claw gripper, flexible, with plastic handle
Smartphone pocket with convenient hook-and-loop fastener
Max Longlife & Speed point chisel
3/8" socket wrench insert metric, hexagon, short
Wooden shaft, conical with ground cone and rounded shaft end
MIG welding wire flux core gasless
MIG welding wire flux core gasless